Contact Adhesive 30NF • 30H

- 8 -

Test Temp.

Time @ 75°F Value (lbs./inch width)

Test Temp.

Value (p

75°F (24°C)

1 Day

25

-30°F (-37°C)

1100

75°F (24°C)

3

35

75°F (24°C)

480

75°F (24°C)

5

30

180°F (82°C)

60

75°F (24°C)

7

20

200°F (93°C)

30

75°F (24°C)

2 wks.

20

225°F (107°C)

40

75°F (24°C)

3 wks.

15

-30°F (-37°C)

3 wks.

5

150°F (66°C)

3 wks.

10

180°F (82°C)

3 wks.

10

Typical Adhesive

Performance

Characteristics

Note: The following technical information and data should be considered representative

or typical only and should not be used for specification purposes.

T-Peel Strength

Overlap Shear Strength

Canvas/Canvas

1⁄8” Birch 1⁄8” Birch

si)

Flatwise Tensile Test: High pressure laminate/particle board.

Test speed = 0.05 in./min.

Test Temperature

3M

™ Fastbond™ Contact Adhesive 30-NF

75°F (24°C)

*113 psi

150°F (66°C)

55 psi

180°F (82°C)

30 psi

200°F (93°C)

27 psi

*Particle board failure

Activation of Pre-Applied Adhesive

Sections of high pressure laminate were sprayed with adhesive, dried, and then

stored at 75°F (24°C). Each month for nine months a piece of pre-coated laminate

was bonded to birch plywood that had been sprayed with adhesive and allowed to

dry for 10 minutes. The bonds were made in a pinch roller and then aged 3 weeks

before testing.

1/8 in. Birch/High-Pressure Laminate Shear Strength (lbs./sq. in.)

Aging Period

Test Temp.

Test Temp.

Test Temp.

Months

75°F (24°C)

150°F (66°C)

180°F (82°C)

Control

265

130

30

3

315

140

80

6

305

150

75

9

285

125

50

Note: Pre-applied adhesive must be kept free of dust and dirt. Pre-applied adhesive

can also be activated with 3M™ Contact Adhesives 5 and 1357.

Surface Flammability

Test conducted in accordance with ASTM E-286-69 “Surface Flammability of

Building Materials” using an eight (8) foot tunnel furnace.

Test Results

3M

™ Fastbond™ Contact Adhesive

30-NF

Flame Spread Index

0

Fuel Contributed Index

0

Smoke Density Index

16.1

Note: No flaming or odor emissions were present during testing. Adhesive

Moisture vapor transmission: MVP rating = 0.0091 perm inches.