MODEL: 10EPA

http://www.m-system.co.jp/

10EPA SPECIFICATIONS

ES-0843 Rev.8 Page 2/3

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Voltage input to current input to output to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

Frequency: 50 or 60 Hz

•Current Input

Input burden: 0.1 VA (input 1 A)

0.5 VA (input 5 A)

Operational range: 10 – 120 % of rating

Overload capacity: 1000 % of rating for 3 sec., 200 %

for 10 sec., 120 % continuous

•Voltage Input

Input burden: Approx. 0.5 VA

Operational range: 85 – 120 % of rating

Overload capacity: 150 % of rating for 10 sec., 120 %

continuous

■ Input range:

Lag 60° – 0 – lead 60°

Lead 60° – 0 – lag 60°

OUTPUT SPECIFICATIONS

■ DC Output

•DC Current: 0 – 20 mA DC and ±1 mA

Minimum span: 1 mA

Offset: ≤ 1.5 times span

Load resistance: Output drive 12 V max.; 10 V for [±] output

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max. at ≥ 0.5 V

12

OUT

20mA

0

60°

(Lead)

60°

(Lag)

0

OUT

+10V

4

12

OUT

20mA

0

OUT

+10V

4

-10V

-10V

0

60°

(Lead)

60°

(Lag)

0

60°

(Lead)

60°

(Lag)

0

60°

(Lead)

60°

(Lag)

■ OPERATION DIAGRAM (example)

• Negative in lag, positive in lead

• Negative in lead, positive in lag

Remark: When there is no input voltage or 5% or less of the rated

input current, the output may become unstable (hunting).

INSTALLATION

Current consumption: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 400 g (0.88 lb)

PERFORMANCE in percentage of span

Accuracy: ±2 % with balanced load

Temp. coefficient: ±0.2 %/°C (±0.11 %/°F)

Response time: ≤ 1 sec. (0 – 90 %)

Ripple: 0.5 %p-p max. (50/60 Hz)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (voltage input to

current input to output or power to ground)

500 V AC @ 1 minute (output to power)