MODEL: M6-PSM

M6-PSM SPECIFICATIONS

ES-9196 Rev.6 Page 1/3

http://www.m-system.co.jp/

POWER SUPPLY MODULE

(for AC power use)

Functions & Features

• Supplying power to M6D, M6N, M6S series signal

conditioners through an installation base (model: M6xBS-

08A)

• Universal AC power input

• Power indicator LED

96.5

(3.80)

18 (.71)

90

(3.54)

mm (inch)

MODEL: M6–PSM[1]

ORDERING INFORMATION

• Code number: M6-PSM[1]

Specify a code from below for [1].

(e.g. M6-PSM/Q)

• Specify the specification for option code /Q

(e.g. /C01)

POWER INPUT

AC Power

100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• Euro Terminal Ultra-Slim Signal Conditioners M6D Series

• Screw Terminal Ultra-Slim Signal Conditioners M6N Series

• Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

GENERAL SPECIFICATIONS

Connection

Power input: Euro type connector terminal,

length 7 mm

24 V DC power: Via the Installation Base (model: M6xBS-

08A)

Housing material: Flame-resistant resin (black)

Isolation: 24 V DC power to power input

Power LED: Green light turns on when the power is supplied.

INSTALLATION

Power Consumption

•AC:

Approx. 25 VA at 100 V

Approx. 30 VA at 200 V

Approx. 35 VA at 264 V

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6xBS-08A)

Weight: 200 g (0.44 lb)

PERFORMANCE

Output: 24 V ±1 V DC, 400 mA (continuance)

Arrange in order that the total current consumed by the

signal conditioners is within this capacity.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (24 V DC power

to power input to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

24 V DC power to power input:

Reinforced insulation (300 V)

RoHS Directive

EN 50581