MODEL: 6TS1

6TS1 SPECIFICATIONS

ES-4211 Rev.8 Page 1/3

http://www.m-system.co.jp/

Field-mounted Two-wire Signal Conditioners 6-UNIT

THERMOCOUPLE TRANSMITTER

(field-configurable; non-linearization)

Functions & Features

• Accepting direct input from a thermocouple and providing

a standard 4 – 20 mA DC signal

• Field selectable temperature range

• Burnout protection

• High-accuracy cold junction compensation

• Rugged enclosure

Typical Applications

• High-accuracy cold junction compensation benefits narrow

span measurements

• 0.1 μA burnout sensing enables long distance

transmission with minimum offset drifts

• Electric furnace (isolation)

76

(2.99) DIA.

60.9 (2.38)

52.5

(2.07)

mm (inch)

MODEL: 6TS1–[1][2]

ORDERING INFORMATION

• Code number: 6TS1-[1][2]

Specify a code from below for each of [1] and [2].

(e.g. 6TS1-2/BL)

• Temperature range (e.g. 0 – 800°C)

• Mounting adapter (e.g. surface mounting adapter plate,

model: A-01)

Note: When a mounting adapter is required, specify

mounting adapter. Not included without specifying.

[1] INPUT THERMOCOUPLE

1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)

7: R (Usable range -50 to +1760°C, -58 to +3200°F)

8: S (Usable range -50 to +1760°C, -58 to +3200°F)

0: Specify

[2] OPTIONS

Burnout

blank: Upscale burnout

/BL: Downscale burnout

RELATED PRODUCTS

• Outdoor enclosure (model: 6BX-E)

PACKAGE INCLUDES...

• Mounting adapter

surface mounting adapter plate (model: A-01)

Spring clip (model: A-02)

DIN rail mounting plate (model: A-31)

Note: When a mounting adapter is required, specify

mounting adapter. Not included without specifying.

When using in combination with outdoor enclosure (model:

6BX-E), use a spring clip (model: A-02).

GENERAL SPECIFICATIONS

Connection: M3 screw terminals (torque 0.6 N·m)

Screw terminal: Nickel-plated steel

Housing material: Diecast aluminum

Isolation: Input to output

Output limit: Approx. 120 %

Zero adjustment: -3 – +15 % (behind the access cover)

Span adjustment: 90 to 110 % (behind the access cover)

DIP/rotary switches: For input calibration

(Refer to the instruction manual)

Linearization: Not provided

Cold junction compensation: CJC sensor attached to the

input terminals

INPUT SPECIFICATIONS

Minimum span: 3 mV

Offset: Max. 1.5 times span

Input resistance: 20 kΩ minimum

Burnout sensing: 0.1 μA

Minimum temperature span (in °C)

(PR): min. span 370°C

K (CA): min. span 75°C

E (CRC): min. span 50°C

J (IC): min. span 60°C

T (CC): min. span 75°C

B (RH): min. span 780°C

R: min. span 360°C

S: min. span 380°C