MODEL: MDP-JS

MDP-JS SPECIFICATIONS

ES-8132 Rev.11 Page 1/4

http://www.m-system.co.jp/

Lightning Surge Protectors for

Electronics Equipment M-RESTER

LIGHTNING SURGE PROTECTOR FOR

SELF-SYNCH USE

Functions & Features

• Designed specifically for self-synchronizing motor circuit

• Protects self-synch transmitter and converter from

damage caused by surges on the wiring

• Absorbs surges only without affecting instrumentation

signal

• No interruption of signal by unplugging the protector

element

MODEL: MDP–JS[1]

ORDERING INFORMATION

• Code number: MDP-JS[1]

Specify a code from below for [1].

(e.g. MDP-JS/A33/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] OPTIONS (multiple selections)

DIN Rail Mounting Adapter

blank: Without

/A33: With adapter (model A-33)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M4 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

INSTALLATION

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 100 g (0.22 lb), standard; 125 g (0.28 lb), with DIN

rail mounting adapter

PERFORMANCE

Max. continuous operating voltage (Uc):

A to B to C: ±170 V

Line to earth: ±290 V

Voltage protection level (Up):

• @ 1 kV (100 A)

1 to 2 to 3: ±350 V

Line to earth: ±650 V

• @ 2 kV (1 kA)

1 to 2 to 3: ±450 V

Line to earth: ±800 V

Response time: ≤ 0.1 μsec.

Leakage current:

A to B to C: ≤ 50 μA @ ±170 V DC

Line to earth: ≤ 50 μA @ ±290 V DC

Max. discharge current (Imax): 5000 A (8 / 20 μs)

Internal series resistance: Approx. 2 Ω (per wire)

Rated line voltage: 90 V AC

Capacitance @ 1 MHz:

Line to line: ≤ 1.5 nF

Line to earth: ≤ 50 pF

Surge protection: IEC 61643-21 Categories C1, C2, D1