| Datenblatt-Suchmaschine für elektronische Bauteile |
|
ACE34AC04TMTH Datenblatt(PDF) 7 Page - ACE Technology Co., LTD. |
|
|
|||||||||||||||||||||||||||||
ACE34AC04TMTH Datenblatt(HTML) 7 Page - ACE Technology Co., LTD. |
|
7 / 22 page ![]() ACE34AC04 4K I 2C Serial EEPROM with Software Write Protection VER 1.1 7 Device Addressing The ACE34AC04 requires a 7-bit device address and a Read/Write select bit following a Start condition from the Master to initiate communication with the Serial EEPROM. The device address byte is comprised of a 4-bit device type identifier followed by three device address bits (A2, A1, and A0) and a R/W bit and is clocked by the Master on the SDA pin with the most significant bit first .The ACE34AC04 will respond to two unique device type identifiers. The device type identifier of ‘1010’(Ah) is necessary to select the device for reading or writing. The device type identifier of ‘0110’(6h) has multiple purposes. First, it is used to access the page address function which determines what the internal address counter is set to. The device type identifier of ‘0110’(6h) is also used to access the software write protection feature of the device. Table 1: Device Address Byte Function Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Read/Write Device Type Identifier Device Address EEPROM Read/Write 1 0 1 0 A2 A1 A0 R/ W Write Protection and Page Address Functions 0 1 1 0 A2 A1 A0 R/ W The software device address bits (A2, A1, and A0) must match their corresponding hard-wired device address inputs (A2, A1 and A0) allowing up to eight devices on the bus at the same time. The eighth bit of the address byte is the R/W operation selection bit. A read operation is selected if this bit is a Logic 1, and a Write operation is selected if this bit is a Logic 0. Upon a compare of the device address byte, the ACE34AC04 will output an ACK during the ninth clock cycle; if a compare is not true, the device will output a NACK during the ninth clock cycle and return the device to the low-power Standby Mode. Table 2: Device Address Combinations Software Device Address Bits Hard-wired Device Address Inputs A2, A1, A0 A2 A1 A0 000 GND GND GND 001 GND GND V CC 010 GND V CC GND 011 GND V CC V CC 100 V CC GND GND 101 V CC GND V CC 110 V CC V CC GND 111 V CC V CC V CC |
|
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |