R7L-EC8ASLASHQ datasheet(2/26 Pages) MSYSTEM

2 / 26 page

MODEL: R7L

R7L SPECIFICATIONS

ES-7804 Rev.13 Page 2/26

http://www.m-system.co.jp/

LonWorks SYSTEM REQUIREMENTS

• LonMaker Turbo Edition Ver.3.2 or higher + LonMaker

Turbo Service Pack 4.0 or higher

• LonMark Resource File Ver.13 or higher

GENERAL SPECIFICATIONS

■ Common Specifications

Power input:

24 V AC ±10 % (50 / 60 Hz)

24 V DC ±10 %; ripple 10 %p-p max.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @1 minute

(between isolated circuits)

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Storage temperature: -20 to +65°C (-4 to +149°F)

Mounting: DIN rail (35 mm wide)

Connection: M3 separable screw terminals

(torque 0.5 N·m)

Screw terminal material: Nickel-plated steel

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

Applicable wire size: 0.25 to 1.65 mm2 (AWG22 to 16)

Housing material: Flame-resistant resin (gray)

Status indicator: PWR, ONLINE, ERR, TX/RX, SVCE

(Refer to the instruction manual for details)

■ Current Consumption & Weight

Current consumption at 24 V AC / 24 V DC

R7L-DA16: 70 mA / 40 mA; 200 g (7.1 oz)

R7L-DC16A: 80 mA / 50 mA; 200 g (7.1 oz)

R7L-DC16B: 80 mA / 50 mA; 200 g (7.1 oz)

R7L-DAC16: 75 mA / 45 mA; 200 g (7.1 oz)

R7L-SV4: 80 mA / 50 mA; 200 g (7.1 oz)

R7L-TS4: 85 mA / 50 mA; 200 g (7.1 oz)

R7L-RS4: 85 mA / 50 mA; 200 g (7.1 oz)

R7L-YV2: 110 mA / 70 mA; 200 g (7.1 oz)

R7L-YS2: 180 mA / 110 mA; 200 g (7.1 oz)

R7L-RR8: 75 mA / 50 mA; 200 g (7.1 oz)

R7L-EA8: 15 mA / 10 mA; 90 g (3.2 oz)

R7L-EA16: 30 mA / 20 mA; 150 g (5.3 oz)

R7L-EC8A: 15 mA / 10 mA; 90 g (3.2 oz)

R7L-EC16A: 30 mA 20 mA; 150 g (5.3 oz)

R7L-EC8B: 15 mA / 10 mA; 90 g (3.2 oz)

R7L-EC16B: 30 mA / 20 mA; 150 g (5.3 oz)

■ Recommended solderless terminal

3.3 (.13) max

mm (inch)

■ I/O Status Indicator

• Discrete I/O

Discrete I/O modules have LED indicators showing I/O signal

status.

• Analog I/O

Analog I/O modules have LED indicators showing network

variable status assigned to fbLED.

(Refer to the instruction manual for details)

■ Service Switch

Used to identify the node in LonWorks network

configuration.

■ Reset Switch

Used to reset the Neuron Chip. Press the switch behind the

front cover to reset.

Control functions are halted while completing resetting and

restarting. Confirm no danger before conducting resetting.

LonWorks COMMUNICATION

Neuron Chip: FT3120 (NeuronID printed in numeric and bar

code [peel-off code 39 format] under the specification

marking on the product; two sticker labels attached)

Transceiver: FT-X1 (equivalent to FTT10A)

Transmission speed: 78 kbps

Twisted-pair cable

Distance, free topology: 500 meters

Max. 64 nodes/channel

R7L-EC8A/Q Datenblatt(PDF) 2 Page - M-System Co.,Ltd.

R7L-EC8A/Q Datenblatt(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Datenblatt Download

Link URL