SCIMX6DP4AVT2AB datasheet(88/168 Pages) NXP

Teilenummer	SCIMX6DP4AVT2AB

Bauteilbeschribung	i.MX 6DualPlus/6QuadPlus Applications Processors Consumer Products

PDF	168 Pages

Scroll/Zoom	100%

Hersteller	NXP [NXP Semiconductors]

Direct Link	http://www.nxp.com

Logo

88 / 168 page

i.MX 6DualPlus/6QuadPlus Applications Processors Consumer Products, Rev. 3, 11/2018

NXP Semiconductors

Electrical Characteristics

Figure 48. RGMII Receive Signal Timing Diagram Original

Figure 49. RGMII Receive Signal Timing Diagram with Internal Delay

4.12.6

Flexible Controller Area Network (FlexCAN) AC Electrical

Specifications

The Flexible Controller Area Network (FlexCAN) module is a communication controller implementing

the CAN protocol according to the CAN 2.0B protocol specification.The processor has two CAN modules

available for systems design. Tx and Rx ports for both modules are multiplexed with other I/O pins. See

the IOMUXC chapter of the i.MX 6DualPlus/6QuadPlus reference manual (IMX6DQPRM) to see which

pins expose Tx and Rx pins; these ports are named FLEXCAN_TX and FLEXCAN_RX, respectively.

4.12.7

HDMI Module Timing Parameters

4.12.7.1

Latencies and Timing Information

Power-up time (time between TX_PWRON assertion and TX_READY assertion) for the HDMI 3D Tx

PHY while operating with the slowest input reference clock supported (13.5 MHz) is 3.35 ms.

SCIMX6DP4AVT2AB Datenblatt(PDF) 88 Page - NXP Semiconductors