DS1040 datasheet(4/6 Pages) MAXIM

Teilenummer	DS1040

Bauteilbeschribung	Programmable One-Shot Pulse Generator

PDF	6 Pages

Scroll/Zoom	100%

Hersteller	MAXIM [Maxim Integrated Products]

Direct Link	https://www.maximintegrated.com/en.html

Logo

4 / 6 page

DS1040

4 of 6

NOTES:

1. All voltages are referenced to ground.

2. Measured with outputs open, minimum period.

3. VCC = 5V @ 25

°C. Width accurate to within ±2 ns or 5%.

4. Temperature variations between 0

°C and 70°C may increase or decrease width by an additional ±1 ns

±3%, whichever is greater.

5. For DS1040 pulse generators with maximum widths less than 50 ns, temperature variations between

°C and 70°C may increase or decrease width by ±1 ns or ±9%, whichever is greater.

6. ICC is a function of frequency and maximum width. Only a pulse generator operating with 40 ns

period and VCC =5.25V will have an ICC =75 mA. For example, a -100 will never exceed 30 mA, etc.

7. See “Test Conditions” sections at the end of this data sheet.

TIMING DIAGRAM Figure 2

DS1040 Datenblatt(PDF) 4 Page - Maxim Integrated Products