GLS53 datasheet(24/109 Pages) EMERSON-NETWORKPOWER

24 / 109 page

GLS100-M Series Specifications

Input

Input range

90-264 Vac; 120-300 Vdc

Frequency

47-63 Hz

Inrush current

50 A max., cold start @ 25°C

Efficiency

88% typical at full load

EMI/RFI

FCC Class B conducted; CISPR22 Class B conducted;

EN55022 Class B conducted; VDE 0878 PT3 Class B conducted

Safety ground

leakage current

275 μA @ 50/60 Hz, 264 Vac input

Output

Maximum power

100 W for convection (80 W for GLS102-M); 150 W with 30 CFM forced air (120 W for GLS102-M)

Adjustment range

±10% min. on the main outputs

Fan output

12 V @ 1 A isolated, ±10%

Hold-up time

10 ms @ 150 W load, 120 Vac input

Overload protection

Short circuit protection on all outputs

Case overload protected @ 110 -160% above rating

Overvoltage protection

15% to 35% above nominal output

Logic Control

Power failure

Open collector logic signal goes high 100-500 msec after main output. It goes low at least 6 msec before loss of regulation.

Remote sense

Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.

Operating temperature

0° to 50°C ambient. Derate each output 2.5% per degree from 50° to 70°C. -20°C start up

Storage temperature

-40°C to 85°C

Electromagnetic

susceptibility

Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3

Humidity

Operating; non-condensing 10% to 95% RH

Vibration

IEC68-2-6 to the levels of IEC721-3-2

MTBF demonstrated

>550,000 hours at full load and 25°C ambient conditions

Mating Connectors

(SK1) AC Input

Molex P/N: 09-50-8031, PINS: 08-52-0113 or Landwin P/N: 3060S0302, PINS: 3360T011P

AC Ground

Molex: 01-90020001

(SK2) DC

Outputs

Molex P/N: 09-50-8081, PINS: 08-52-0113 or Landwin P/N: 3060S0802, PINS: 3360T011P

(SK203) Remote

Sense

Molex P/N: 35155-0400, PINS: 08-70-0057 or Landwin P/N: 2640S04A0, PINS: 2543T011P

(SK5) Fan

Molex P/N: 22-01-1042, PINS: 08-70-0049 or Landwin P/N: 2510S04A0, PINS: 2543T011P

Connector Kit #70-841-025, includes all of the above

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm).

3. Specifications are for convection rating at factory settings at 115 Vac input 25°C unless otherwise stated.

4. Mounting holes MH1 and MH2 should be grounded for EMI purposes.

5. Mounting hole MH1 is safety ground connection.

6. This power supply requires mounting on metal standoffs 0.20” (5 m) in height.

7. Warranty: 2 year

8. Weight: 0.44 lb/0.20 kg

Phone: (800) 377-4384

Email: tech@solahd.com

www.solahd.com

Electrical Specifications

Environmental Specifications

GLS53 Datenblatt(PDF) 24 Page - Emerson Network Power

GLS53 Datenblatt(HTML) 24 Page - Emerson Network Power

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datenblatt Download

Link URL