AD9540PCB datasheet(3/32 Pages) AD

3 / 32 page

AD9540

Rev. 0 | Page 3 of 32

PRODUCT OVERVIEW

The AD9540 is Analog Devices’ first dedicated clocking product

specifically designed to support the extremely stringent clock-

ing requirements of the highest performance data converters.

The device features high performance PLL circuitry, including a

flexible 200 MHz phase frequency detector and a digitally

controlled charge pump current. The device also provides a low

jitter, 655 MHz CML-mode, PECL-compliant output driver with

programmable slew rates. External VCO rates up to 2.7 GHz are

supported. Extremely fine tuning resolution (steps less than

2.33 µHz) is another feature supported by this device. Informa-

tion is loaded into the AD9540 via a serial I/O port that has a

device write-speed of 25 Mb/s. The AD9540 frequency

divider block can also be programmed to support a spread

spectrum mode of operation.

The AD9540 is specified to operate over the extended

automotive range of −40°C to +85°C.

AD9540PCB Datenblatt(PDF) 3 Page - Analog Devices