| Datenblatt-Suchmaschine für elektronische Bauteile |
|
WLAN8101CMP Datenblatt(PDF) 8 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
WLAN8101CMP Datenblatt(HTML) 8 Page - NXP Semiconductors |
|
8 / 20 page ![]() NXP Semiconductors WLAN8101C 5 GHz Wi-Fi 6 Front-End Module 13 Characteristics 13.1 Switching time performance Tamb = 25 °C; VCC = 3.85 V: All ports are terminated with 50 Ω, single channel performance. Unless otherwise specified Symbol Parameter Conditions Min Typ Max Unit ton(LNA) LNA turn-on time from 10 % to 90 % of LNA output level, bypass/LNA transition - 170 - ns toff(LNA) LNA turn-off time from 90 % to 10 % of LNA output level, bypass/LNA transition - 230 - ns ton(PA) PA turn-on time from 10 % to 90 % of PA output level, LNA/TX transition - 250 - ns toff(PA) PA turn-off time from 90 % to 10 % of PA output level, LNA/TX transition - 250 - ns Table 9. Switching time performance 13.2 RF performance from ANT to RX Tamb = 25 °C; VCC = 3.85 V; VIH = 1.8 V; VIL = 0 V; All ports are terminated with 50 Ω; Pi = -30 dBm, f = 5.150 GHz to 5.925 GHz, single channel performance. Unless otherwise specified. All values are measured at product input/output as reference plane. Measurements are done using the application schematic. (See application note AN12711) Symbol Parameter Conditions Min Typ Max Unit RX_gain - 11.6 - mA ICC supply current RX_bypass - 7.5 - µA RX_gain - 16 - dB Gp power gain RX_bypass - -5.5 - dB RX_gain, peak-to-peak over any 80 MHz band - +/-0.25 - dB RX_gain, over full RF bandwidth - +/-0.75 - dB RX_bypass, peak-to-peak over any 80 MHz band - +/-0.25 - dB Gflat power gain flatness RX_bypass, over full RF bandwidth - +/-0.75 - dB NF noise figure RX_gain - 2.5 - dB RX_gain , looking into ANT pin - 10 - dB RLi input return loss RX_bypass , looking into ANT pin - 9 - dB RX_gain , looking into RX pin - 10 - dB RLo output return loss RX_bypass , looking into RX pin - 10 - dB RX_gain [1] - 1.5 - dBm IP3i input third order intercept point RX_bypass [2] - 27 - dBm RX_gain - -9 - dBm Pi(1dB) input power at 1 dB gain compression point RX_bypass - 14.0 - dBm Table 10. RF performance from ANT to RX [1] Pi = -20 dBm/tone, (20 MHz tone spacing) [2] Pi = -3 dBm/tone, (20 MHz tone spacing) WLAN8101C All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved. Product data sheet Rev. 3 — 11 August 2020 8 / 20 |
|
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |