WD1 datasheet(6/23 Pages) ETC

6 / 23 page

6-18

WD 1 (M) / WD 1000 (M)

4.2

Technical data WD 1 (M) / WD 1000 (M)

Dimensions

L x W x H (mm): 134 x 108 x 147

L x W x H (inches): 5.27 x 4.27 x 5.77

Weight

approx. 3.4 kg

Mains supply voltage

230 V, 50/60 Hz

120 V, 60 Hz

100 V, 50/60 Hz

Power consumption

95 W

Safety class

I and III, housing antistatic

Fuse (12)

Only WD 1 / WD 1000

T 500 mA (230 V, 50 / 60 Hz)

T 1.0 A (120 V, 60 Hz)

T1.25 A (100 V, 50 / 60 Hz)

Fuse (12)

Only WD 1 M/ WD 1000M

T 800 mA (230 V, 50 / 60 Hz)

T 1.6 A (120 V, 60 Hz)

T1.6 A (100 V, 50 Hz)

Temperature control

50 °C – 450 °C (150 °F – 842 °F)

Temperature accuracy

± 9 °C (± 17 °F)

Temperature stability

± 5 °C (± 9 °F)

Soldering tip leakage

resistance (tip to ground)

Complies with IPC-J-001D

Soldering tip leakage

current (tip to ground)

Complies with IPC-J-001D

Equipotential bonding

Via 3.5 mm pawl socket on back of

device (8).

Equipotential bonding

4 variants are possible through connecting the 3.5 mm pawl

socket (8) differently:

−

Hard earthed/grounded: without connector (delivery status)

−

Equipotential bonding: with connector, bonding line at central

contact

−

Floating: with connector

−

Soft earthed/grounded: with connector and soldered resistor.

Earthing/grounding via the selected resistor

USB port

The control units WD 1M and WD 1000M are fitted with a mini USB

interface (10). For the purpose of using the USB port, Weller

software is available on a CD with which you

−

can carry out a software update ("Firmware Updater“) on your

control unit and

−

can remote-control the control unit and graphically display, store

and print temperature curves ("Monitor Software“).

Note Control units WD 1 and WD 1000 can be retrofitted with a USB

interface.

WD1 Datenblatt(PDF) 6 Page - List of Unclassifed Manufacturers

WD1 Datenblatt(HTML) 6 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Datenblatt Download

Link URL