VJ Non-Magnetic Series for Reflow Soldering

www.vishay.com

Vishay Vitramon

Revision: 15-Jan-2021

1

Document Number: 45227

For technical questions, contact: mlcc@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount Multilayer Ceramic Chip Capacitors

for Non-Magnetic Applications (Reflow Soldering)

FEATURES

• Manufactured with non-magnetic materials

• Safety screened for magnetic properties

•C0G (NP0) and X7R / X5R dielectrics

• Wide range of case sizes, voltage ratings,

and capacitance values

• Suitable for reflow assembly methods

• Wet built process

• Reliable Noble Metal Electrode (NME) system

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Magnetic Resonance Imaging (MRI)

• Medical test and diagnostic equipment

• Laboratory analysis systems

• Navigation and electronic test equipment

• Audio amplifiers

ELECTRICAL SPECIFICATIONS

NON-MAGNETIC C0G (NP0)

GENERAL SPECIFICATION

Note

Electrical characteristics at +25 °C unless otherwise specified

Operating Temperature: -55 °C to +125 °C

Capacitance Range: 1.0 pF to 39 nF

Voltage Range: 10 VDC to 3000 VDC

Temperature Coefficient of Capacitance (TCC):

0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C

Dissipation Factor (DF):

0.1 % maximum at 1.0 VRMS and

1 MHz for values

≤ 1000 pF

0.1 % maximum at 1.0 VRMS and

1 kHz for values > 1000 pF

Insulating Resistance:

at +25 °C 100 000 M

Ω min. or 1000 ΩF whichever is less

at +125 °C 10 000 M

Ω min. or 100 ΩF whichever is less

Aging: 0 % maximum per decade

Dielectric Strength Test:

performed per method 103 of EIA 198-2-E.

Applied test voltages

≤ 200 VDC-rated:

250 % of rated voltage

500 VDC-rated:

200 % of rated voltage

630 VDC, 1000 VDC-rated:

150 % of rated voltage

1500 VDC to 3000 VDC-rated:

120 % of rated voltage

NON-MAGNETIC X7R / X5R

GENERAL SPECIFICATION

Note

Electrical characteristics at +25 °C unless otherwise specified

Operating Temperature: -55 °C to +125 °C

Capacitance Range: 100 pF to 6.8 μF

Voltage Range: 6.3 VDC to 3000 VDC

Temperature Coefficient of Capacitance (TCC):

X5R: ± 15 % from -55 °C to +85 °C, with 0 VDC applied

X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied

Dissipation Factor (DF):

≤ 6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz

16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz

≥ 50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz

Insulating Resistance:

at +25 °C 100 000 M

Ω min. or 1000 ΩF whichever is less

at +125 °C 10 000 M

Ω min. or 100 ΩF whichever is less

Aging Rate: 1 % maximum per decade

Dielectric Strength Test:

performed per method 103 of EIA 198-2-E.

Applied test voltages

≤ 200 VDC-rated:

250 % of rated voltage

500 VDC-rated:

min. 150 % of rated voltage

630 VDC, 1000 VDC-rated:

min. 120 % of rated voltage

1500 VDC, 3000 VDC-rated:

120 % of rated voltage