www.gminternational.com

D5030

I.S. SIL3 Switch/Proximity Relay-Out Repeater

Intrinsically Safe Isolators > Digital Input

ORDERING INFORMATION

Ordering codes

D5030S: 1 channel

D5030D: 2 channels

Accessories

Bus Connector JDFT049, Bus Mounting Kit OPT5096.

TECHNICAL DATA

SIL 3 / SC 3

Input from Zone 0/Div. 1

Installation in Zone 2/Div. 2

2 fully independent channels

High voltage/current rating relay output

Field open and short circuit detection

In-field programmability by DIP Switch

Three port isolation, Input/Output/Supply

High Density, two channels per unit

The Switch/Proximity Detector Repeater D5030 is a module suitable

for applications requiring SIL 3 level in safety related systems for

high risk industries. The unit can be configured for switches or

proximity detectors, located in Hazardous Area, and repeats the input

state to a relay contact in Safe Area. The selectable fault detection

circuit is available for proximity sensors or switches equipped with

end of line resistors. In the double-channel model, the second output

can be configured to repeat the second input, to duplicate the first

input or to report the first input fault. If needed, the output can also be

inverted.

FEATURES

Supply

24 Vdc nom (18 to 30 Vdc), reverse polarity protected.

Current consumption: 35 mA (D5030D), 18 mA (D5030S), @ 24 Vdc with

short circuit input and relay energized, typical.

Power dissipation: 0.85 W (D5030D), 0.45 W (D5030S), @ 24 Vdc with

short circuit input and relay energized, typical.

Input

Input switching current levels: ON ≥ 2.1 mA, OFF ≤ 1.2 mA.

Fault current levels: open fault ≤ 0.2 mA, short fault ≥ 6.8 mA.

Input equivalent source: 8 V 1 kΩ typical (8 V no load, 8 mA short).

Output

Voltage free SPST (D5030D) or SPDT (D5030S) relay contact.

Contact material: Ag Alloy (Cd free), gold plated.

Contact rating: 4 A 250 Vac 1000 VA, 4 A 250 Vdc 120 W (resistive load).

Contact min. switching current: 1 mA.

DC and AC load breaking capacity: refer to Instruction Manual.

Mechanical / electrical life: 5 * 10⁶ / 3 * 10⁴ operation, typical.

Operate / release time: 8 / 4 ms, typical.

Frequency response: 10 Hz maximum.

Isolation

I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/ I.S In 500 V; Out/Supply 2.5

kV; Out/Out 2.5 kV.

Environmental conditions

Operating temperature: temperature limits –40 to +70 °C.

Storage temperature: temperature limits –45 to +80 °C.

Safety description

Associated apparatus and non-sparking electrical equipment.

Uo = 10.5 V, Io = 22 mA, Po = 56 mW at terminals 7-8, 9-10.

Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.

Mounting

DIN-Rail 35 mm, with or without Power Bus.

Weight: about 140 g (D5030D), 120 g (D5030S).

Connection: by polarized plug-in disconnect screw terminal blocks to

accommodate terminations up to 2.5 mm² (13 AWG).

Dimensions: Width 12.5 mm, Depth 123 mm, Height 120 mm.

OVERALL DIMENSIONS

Functional Safety Management Certification:

GM International is certified to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3. In addition, GM International products have been granted I.S.

certificates from the most credited Notified Bodies in the world.

Data specified in this document are merely descriptive of the products and should be integrated with relevant technical specifications. Our products are in constant development and the information

presented herein refers to the time of document issue. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not

release the user from the obligation of own judgment and verification. Terms & Conditions can be found at our website. For more information refer to istruction manual.

DTS0282-14

© G.M. International s.r.l.

Page 1/2