PicoVNA® 100 Series vector network analyzers

Full instrument functionality using PicoVNA 3 software

Show all S-parameters separately or combine on a single plot.

Configure as one, two or four channels and show one to four

live traces on each. Add one to four memory traces to each.

Plot both reflection parameters (S

11, S22) as LogMag and Phase.

Gain and phase can be combined in one plot, but with up to four

live traces, why not plot forward and reverse match and phase or

gain and phase together, as above?

Show S

11 and S22 on the same Smith chart.

Add up to four memory traces if required.

Plot both reflection parameters (S

11, S22) as LogMag and SWR.

Two of four memory traces in use to compare another DUT.

Compare network pulse responses using S

21 time domain.

Here using a live trace and up to four memory traces to

compare low pass filter responses with through response.

Display a single parameter at two sensitivities or offsets.

Here we see passband S

21 flatness and S21/S12 stopbands

as live traces on the same plot.

The PicoVNA 3 software and GUI interfaces with the VNA over USB 2.0 and displays or exports measurement results. MS Windows display, in default or dark theme, presents up to four user

configurable plot channels, with dual y-axis cartesian, polar or Smith plots, each supporting up to four live and four memory traces and eight measurement markers. Marker results are tabulated to the

right and summarized below each plot to give at-a-glance understanding of the networks under test. Y-axis reference, scalings and offset are click and drag or type editable.