GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM

HIGH ACCURACY ROOM TEMPERATURE TRANSMITTER WITH LCD

HATXRCL SERIES

PRODUCT DESCRIPTION

The HATXRCL series room temperature transmitter

with LCD display is an attractive, low profile enclosure

that incorporates a high accuracy temperature sensor

and a transmitter that provides a high accuracy signal

with excellent long term stability, low hysteresis and

fast response for measurement of room temperatures.

Additional options are available Manual override,

Communications jack & Fan speed control.

TYPICAL INSTALLATION

For complete installation and wiring details, please

refer to the product installation instructions.

The HATXRCL series can be mounted directly to a single

gang electrical box or directly to a wall. Insulation foam is

adhered to the back of the enclosure to provide a thermal

barrier from wall temperatures.

A terminal block connection is provided for connection to

the Building Automation System.

POWER SUPPLY

24Vac/dc ±10% (non-isolated half-wave rectified)

CONSUMPTION

40 mA max @ 24 Vdc

INPUT VOLTAGE EFFECT

Negligible over specified operating range

PROTECTION CIRCUITRY

Reverse voltage protected and output limited

OUTPUT SIGNAL

4-20 mA active (sourcing) or 0-5 Vdc or 0-10 Vdc (specify when ordering)

OUTPUT RESOLUTION

10 bit for all signals

OUTPUT DRIVE CAPABILITY

Current: 550Ω max

Voltage: 10,000Ω min

PROGRAMMING AND SELECTION

Via push buttons and on-screen menu

OPERATING CONDITIONS

0 to 50°C (32 to 122°F), 0 to 95 %RH, non-condensing

WIRING CONNECTIONS

Screw terminal block (14 to 22 AWG)

ENCLOSURE

White ABS, IP30 (NEMA 1)

84mm W x 117mm H x 29mm D (3.3” x 4.6” x 1.15”)

LCD DISPLAY

Display Size: 38.1 x 16.5 mm (1.5” x 0.65”)

Digit Height: 11.43 mm (0.45“)

Symbols: ˚C, ˚F, OCC

Backlight: Enable or disable via menu

TEMPERATURE

Accuracy: ±0.1°C (±0.18°F)

Range: 0 to 35°C (32 to 95°F) or 0 to 50°C (32 to 122°F) programmable

Offset: ±9°F programmable

Units: °C or °F programmable

Resolution: 0.5° < 100°, 1° > 100°

OPTIONAL OVERRIDE

Front Panel Push Button: 2 wire dry contact

Switch Ratings: N.O., SPST, 50 mA @ 12 Vdc

OCCUPIED INPUT

Signal Type: Digital input, 0/5 Vdc or dry contact to common

Logic: Active low or active high, programmable

Action: Causes “OCC” segment to light on LCD

OPTIONAL FAN SPEED SWITCH

Type: Side mounted, 5 position slide switch

Designators: Off, Auto, Low, Medium, High

Signal: 2 wire, resistance output - 0, 2, 4, 6, 8 KΩ,

Custom ranges available, contact Greystone

OPTIONAL COMMUNICATION JACKS

3.5mm phono jack Ring/Mid/Tip connections to a 3-pin terminal block

COUNTRY OF ORIGIN

Canada

SPECIFICATIONS

119 mm

4.7“

29 mm

1.15 “

82.6 mm

3.25 “

58 mm

2.3 “

84 mm

3.3“