0015003

DATA SHEET

valid from:

01.01.2019

Creator:

LABU / PDC

Released:

ALTE / PDC

Document: DB0015003EN

Version:

09

Page 1 of 1

We reserve all rights according to DIN ISO 16016.

PD 0019/05_04.18EN

Application

ional

flexible use and fixed installation to normal mechanical load conditions. They are also suitable for use in dry, damp or wet areas. If using

outdoors, observe the indicated temperature range and use with UV protection.

argely resistant to acids and alkalis. They are suitable for

occasional, non-automated movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and

operation. Compulsory guidance is not permitted.

Application range:

plant engineering, industrial machinery, heating and air conditioning systems and machine tools

HAR:

DIN EN 50565-1 resp. VDE 0298-565-1 and DIN EN 50565-2 resp. VDE 0298-565-2

acc. to UL:PVC-sheathed cables for external interconnection or internal wiring of electric and electronic equipment,

use when getting in contact with oil not above +80 °C (80 °C oil rating)

acc. CSA:CSA AWM I A/B II A/B, cables for internal or external interconnection with or without mechanical load

Design

Design

≤ 60 cores: acc. to EN 50525-2-51 resp. VDE 0285-525-2-51

≥ 61 cores: based on EN 50525-2-51resp. VDE 0285-525-2-51

UL AWM Style 21098, UL 758, CSA C22.2 No. 210-15

Certification

UL AWM Style 21098 (File No. E63634), UL 758

CSA AWM I A/B II A/B (File No. LL 53776)

≤ 60 cores: acc. to H05VV5-F acc. to EN 50525-2-51 resp. VDE 0285-525-2-51

≥ 61 cores: based on EN 50525-2-51 resp. VDE 0285-525-2-51

Conductor

fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5

Insulation

PVC compound TI2 acc. to DIN EN 50363-3 resp. VDE 0207-363-3

(UL/CSA 90°C rating)

Core identification code

acc. to VDE 0293-1, with or without GN/YE ground conductor

black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334

Outer sheath

PVC compound TM5 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1

(UL/CSA 90°C rating)

colour: silver grey, similar RAL 7001

dl safjl öjf

Electrical properties at 20°C

Rated voltage

U₀ / U in acc. to HAR: 300 / 500 V

U acc. to UL / CSA:

600 V

Test voltage

core / core: 3000 V AC

Mechanical and thermal properties

Minimum bending radius

occasional flexing:

12,5 x cable diameter

fixed installation:

4 x cable diameter

Temperature range

occasional flexing: acc. to HAR

-5 °C up to +70 °C max. conductor temp.

acc. to UL / CSA -5 °C up to +90 °C max. conductor temp.

fixed installation: acc. to HAR

-40 °C up to +70 °C max. conductor temp.

acc. to UL / CSA

up to +90 °C max. conductor temp.

Flammability

HAR: acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2

UL:

vertical flame test VW-1

CSA: FT1

Oil resistance

TM 5 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1

UL:

80 °C rating acc. to UL 758

CSA: CSA 22.2 No. 210-15

Tests

acc. to IEC 60811, EN 50395, EN 50396, UL 1581and CSA 22.2

General requirements

These cables are conform to the EU-Directive 2014/35/EU (Low Voltage Directive)