High Power GaAs SPDT Switch

DC - 3.0 GHz

SW-276

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V3

5

RoHS

Compliant

Table 1 - Screening

Test

Sample Size

Method/Condition

Internal Visual

11

1%

M/A-COM Workmanship Standard

Stabilization Bake

100%

1008/C, 150°C for 24 hours

Temperature Cycling

100%

1010/C, -65°C, 150°C

Constant Acceleration

100%

2001/A, 5000G, Y1 Plane only

Burn-In

12

100%

1015, 125°C for 160 hours

Final Electrical

100%

Product Data Sheet Guaranteed Parameters

Seal Test - Fine Leak

100%

1014/A

Seal Test - Gross Leak

100%

1014/C

External Visual

13

100%

M/A-COM Workmanship Standard

10. This test does not apply to connectorized units. Connectorized units using hermetically sealed hybrid microcircuits will be screened to

Table 1 at the hybrid level.

11. Sample size for internal visual will be per MIL-STD-105, AQL 1%.

12. Burn-in temperature will be reduced as necessary to keep the internal junction temperatures from exceeding their absolute maximum

ratings.

13. Parts will be marked with their standard marking, plus a screening date and “T1” to signify that they were screened.

Test

Sample Size

Method/Condition

Internal Visual

100%

2017

Stabilization Bake

100%

1008/C, 150°C for 24 hours

Temperature Cycling

100%

1010/C, -65°C, 150°C

Constant Acceleration

100%

2001/A, 5000G, Y1 Plane only

Burn-In

14

100%

1015, 125°C for 160 hours

Final Electrical

100%

Product Data Sheet Guaranteed Parameters

Seal Test - Fine Leak

100%

1014/A

Seal Test - Gross Leak

100%

1014/C

External Visual

15

100%

2009

14. Burn-In temperature will be reduced as necessary to keep the internal junction temperatures from exceeding their absolute maximum

ratings.

15. Parts will be marked with their standard marking, plus a “B” suffix.