Memosens CPS41E

8

Endress+Hauser

Process connections

Pg 13.5

Certificates and approvals



mark

The product meets the requirements of the harmonized European standards. As such, it complies

with the legal specifications of the EU directives. The manufacturer confirms successful testing of the

product by affixing to it the  mark.

Ex approval

ATEX

II 1G Ex ia IIC T3/T4/T6 Ga

IECEx

Ex ia IIC T3/T4/T6 Ga

NEPSI

Ex ia IIC T3/T4/T6 Ga

CSA C/US

• IS Cl. I Div 1, GP A-D Ex ia IIC T3/T4/T6

• IS Cl. I Zone 0, AEx ia IIC T3/T4/T6

Japan Ex

Ex ia IIC T3/T4/T6 Ga

INMETRO

Ex ia IIC T3/T4/T6 Ga

Ex versions of digital sensors with Memosens technology are identified by an orange-red ring

on the plug-in head.

Pay attention to the instructions for Memosens data cable CYK10 and transmitter CM82.

TÜV certificate for

Memosens plug-in head

Pressure resistance 16 bar (232 psi) relative, minimum three times the safety pressure

EAC

The product has been certified according to guidelines TP TC 004/2011 and TP TC 020/2011 which

apply in the European Economic Area (EEA). The EAC conformity mark is affixed to the product.

Ordering information

Product page

www.endress.com/cps41e

Product Configurator

On the product page there is a Configure button to the right of the product image.

1. Click this button.

 The Configurator opens in a separate window.

2. Select all the options to configure the device in line with your requirements.

 In this way, you receive a valid and complete order code for the device.

3. Export the order code as a PDF or Excel file. To do so, click the appropriate button on the right

above the selection window.

For many products you also have the option of downloading CAD or 2D drawings of the

selected product version. Click the CAD tab for this and select the desired file type using

picklists.

Scope of delivery

The delivery comprises:

• Sensor in the version ordered

• Operating Instructions

• Safety instructions for the hazardous area (for sensors with Ex approval)