Features

•

ST25R3916B NFC card reader IC

•

47 x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and

associated tuning circuit

•

6 general purpose LEDs and 1 Key for user interface

•

EEPROM for automatic GPIO setup and driver setup

•

Compatible with STM32MP157F-DK2, STM32MP135F-DK & Raspberry Pi’s

GPIO connector

Description

Then X-STM32MP-NFC08 is an NFC card reader evaluation board having an NFC

card reader IC. It includes an antenna etched on the PCB and associated tuning

circuit, general-purpose LEDs, and switches.

It embeds the ST25R3916B NFC card reader IC, which is a high-performance NFC

universal device supporting NFC initiator, NFC target, NFC reader, and NFC card

emulation modes.

The ST25R3916B device includes an advanced analog front end (AFE) and a highly

integrated data framing system for: ISO 18092 passive and active initiator, ISO

18092 passive and active target, NFC-A/B (ISO 14443A/B) reader including higher

bit rates, NFC-F (FeliCa™) reader, NFC-V (ISO 15693) reader up to 53 kbps, and

NFC-A / NFC-F card emulation.

The X-STM32MP-NFC08 interfaces with the STM32MP microprocessor via 40-pin

GPIO connector pins using SPI, I²C, and GPIO connections for various components.

It is compatible with STM32MP157F-DK2, STM32MP135F-DK & Raspberry Pi’s

GPIO connector layout.

Product summary

STM32MP

expansion board for

NFC card reader

X-STM32MP-

NFC08

NFC reader for

payment, consumer

and industrial

ST25R3916B

Discovery kit with

STM32MP157F

MPU

STM32MP157F-

DK2

Discovery kit with

STM32MP135F

MPU

STM32MP135F-

DK

Applications

NFC / RFID

STM32MP expansion board for NFC card reader

X-STM32MP-NFC08

Data brief

DB5134 - Rev 1 - November 2023

For further information contact your local STMicroelectronics sales office.

www.st.com