ADL8103ACPZN-R7 datasheet(24/25 Pages) AD

Teilenummer	ADL8103ACPZN-R7

Bauteilbeschribung	High Input Survivability, Low Noise Amplifier, 6 GHz to 12 GHz

PDF	25 Pages

Scroll/Zoom	100%

Hersteller	AD [Analog Devices]

Direct Link	http://www.analog.com

Logo

24 / 25 page

Data Sheet

ADL8103

USING THE RBIAS PIN TO ENABLE AND DISABLE ADL8103

analog.com

Rev. 0 | 24 of 25

By attaching a single-pole, double throw (SPDT) switch to the

RBIAS pin, an enable and/or disable circuit can be implemented as

shown in Figure 93. The ADG719 CMOS switch is used to connect

the RBIAS resistor either to supply or ground. When the RBIAS

resistor is connected to ground, the overall current consumption

reduces to 3.8 mA with no RF signal present and 3.8 mA when the

RF input level is −10 dBm.

Figure 94 shows a plot of the turn on and/or turn off response

time of the RF output envelope when the IN pin of the ADG719 is

pulsed.

Figure 93. Fast Enable and/or Disable Circuit Using an SPDT

Figure 94. On and/or Off Response of the RF Output Envelope When the IN

Pin of the ADG719 Is Pulsed

ADL8103ACPZN-R7 Datenblatt(PDF) 24 Page - Analog Devices