MB95130MB datasheet(5/64 Pages) FUJITSU

5 / 64 page

MB95130MB Series

(Continued)

*1 : For ROM capacity and RAM capacity, refer to “

■ MEMORY LINEUP”.

*2 : For details of option, refer to “

■ MASK OPTION”.

*3 : Specify clock mode when ordering MASK ROM.

*4 : Embedded Algorithm is a trade mark of Advanced Micro Devices Inc.

Note : Part number of evaluation product in MB95130MB series is MB95FV100D-103.

When using it, the MCU board (MB2146-303A) is required.

Part number

Parameter

MB95136MB

MB95

F133MBS/

F134MBS/

F136MBS

MB95

F133NBS/

F134NBS/

F136NBS

MB95

F133MBW/

F134MBW/

F136MBW

MB95

F133NBW/

F134NBW/

F136NBW

MB95

F133JBS/

F134JBS/

F136JBS

MB95

F133JBW/

F134JBW/

F136JBW

8/16-bit

compound

timer

(1 channel)

Each channel of the timer can be used as “8-bit timer x 2 channels” or “16-bit timer x 1 channel”.

Built-in timer function, PWC function, PWM function, capture function and square wave-form output

Count clock: 7 internal clocks and external clock can be selected.

16-bit PPG

(1 channel)

PWM mode or one-shot mode can be selected.

Counter operating clock: Eight selectable clock sources

Support for external trigger start

8/16-bit PPG

(1 channel)

Each channel of the PPG can be used as “8-bit PPG x 2 channels” or “16-bit PPG x 1 channel”.

Counter operating clock: Eight selectable clock sources

Watch

counter

(for dual

clock

product)

(1 channel)

Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)

Counter value can be set from 0 to 63. (Capable of counting for 1 minute when selecting clock

source 1 second and setting counter value to 60)

Watch

prescaler

(for dual

clock

product)

(1 channel)

Four selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)

External

interrupt

(8 channels)

Interrupt by edge detection (rising, falling, or both edges can be selected.)

Can be used to recover from standby modes.

Flash memory

Supports automatic programming, Embedded AlgorithmTM *4

Write/Erase/Erase-Suspend/Resume commands

A flag indicating completion of the algorithm

Number of write/erase cycles (Minimum) : 10000 times

Data retention time : 20 years

Erase can be performed on each block

Block protection with external programming voltage

Flash Security Feature for protecting the content of the Flash

(MB95F136MBS/F136NBS/F136JBS/F136MBW/F136NBW/F136JBW)

Standby mode Sleep, stop, watch (for dual clock product), and timebase timer

MB95130MB Datenblatt(PDF) 5 Page - fujitsu semiconductor

MB95130MB Datenblatt(HTML) 5 Page - fujitsu semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datenblatt Download

Link URL