TMX HT02

SAW Bandpass Filters | Telecommunications

Issue: Rev 2, 10 January 2023

Specifications are subject to change without notice

Copyright © 2014 to 2023 Rakon Limited. All rights reserved

Page 3 of 5

www.rakonxpress.com

Frequency Characteristics

Recommended Reflow Soldering Profile

NOTE:

•

The components shall remain within the electrical specifications after it soldered on the 1mm thickness PCB board and dipped

in the solder at 260 ± 5°C during 10 ± 1 seconds.

•

The components shall remain within the electrical specifications after it soldered by electric iron, solder at 350 ± 10 °C during

3~4 seconds. Recovery time: 2 ± 0.5 hour.

•

Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic cleaning.

•

Only leads of components may be soldered. Please avoid soldering another part of the component.

20

40

60

80

100

120

140

160

180

200

220

240

260

280

Time (Sec)

TYPICAL S21 RESPONSE