DS1703K

6 of 11

DS1620/DS1720 Data Log Tab

The Data Log tab is the final tab available in the DS1620/DS1720 software interface. Figure 9 shows

the Data Log tab with the Temperature tab selected within it.

Figure 9. Temperature Tab

The Temperature tab is used to graphically display the temperature obtained from the part. The

option button to the right of the temperature determines if Celsius or Fahrenheit data is plotted.

Switching the temperature mode causes the chart to clear all data points, and then resume plotting.

Below the chart is a combo box used to set the time interval between temperature plots. The final

button on this tab is labeled Clear Graph. Pressing this button clears the temperature plot shown.

DS1620/DS1720 Log to File Tab

The data from the device can also be saved to a text file by selecting the Log to File tab within the

Data Log tab. This tab is shown in Figure 10.

Figure 10. Log to File Tab