TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2020-07-20

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com

The Embedded I/O Company

TCPS260 3U CompactPCI Serial PMC Module Carrier

Application Information

The TCPS260 is a PICMG CPCI-S.0 R2.0 compatible 3U

module that provides one slot for a single-width PMC

module used to build modular, flexible and cost effective

I/O solutions for all kinds of applications like process

control, medical systems, telecommunication and traffic

control.

The TCPS260 is a versatile solution to upgrade well

known PMC I/O solutions to the CompactPCI Serial

standard.

The bridging between the system host board and the PMC

slot is handled by a transparent PCIe-to-PCI Bridge. The

Bridge provides an x1, Rev. 2.0 PCIe link with 2.5 Gbps

signaling rate.

On the PMC side, PCI signaling voltages of 3.3V and 5V

are supported; 3.3V signaling is default. 32-bit PCI

accesses are possible with 33MHz or 66MHz. The

TCPS260 supports PMC front-panel I/O.

Technical Information

 Form Factor: 3U CPCI-S.0 R2.0

 Board size: 160 mm x 100 mm

 One PMC site conforming to IEEE 1386.1

 PCI Interface: 33/66 MHz, 32-Bit

 PCI I/O Signaling Voltage: 3.3V or 5V (3.3V

factory default)

 PMC Front Panel I/O

 XIO2001 PCIe-to-PCI Bridge

 PCI Express x1, Revision 2.0

 2.5 Gbps signaling rate

 Operating temperature -40°C to +85°C

 MTBF (MIL-HDBK217F/FN2 GB 20°C)

TCPS260-10R: 672000 h