The Embedded I/O Company

TIP810

CAN Bus IP

Application Information

The TIP810 is an IndustryPack

 compatible module with

a complete CAN bus interface using the Philips SJA1000

CAN controller. The Philips SJA1000 CAN controller is a

stand-alone controller for the Controller Area Network

(CAN) used within automotive and general industrial

environments.

It is the successor of the PCA82C200 CAN controller

(Basic CAN) from Philips Semiconductors which was used

on the TIP810-10R V1.0. Additionally, a new mode of

operation (PeliCAN) is implemented on the SJA1000

which supports the CAN 2.0B protocol specification with

several new features. The SJA1000 has the capability to

transmit, receive and perform message filtering on

standard and extended messages.

The TIP810 supports an 8 bit bus interface which permits

byte accesses to the internal registers of the SJA1000

controller. The physical interface supports both, CAN high-

speed (according to ISO11898) and modified RS485. Both

physical interfaces are optically isolated from the CAN

controller. An on board DC/DC converter supplies the

isolated parts of the TIP810.

The CAN Software Support TIP810-SW-xx provides

functionality

to

route

CAN

messages

to

dedicated

processes.

Software Support (TIP810-SW-xx) is available for different

operating systems.

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 3.0.1

2017-08-24

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com