A1

A1

MECHANICAL CHARACTERISTICS

TECHNICAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

STANDARD PART NUMBERS

DIMENSIONS

COMPONENTS

1K2

Recommended for all PCB applications as the most compact

changeover switch on the market, the 1K2 is ideal as a jumper

replacement.

A standard (red) or extended (black) slide actuator gives instant

recognition of switch position.

• Resistance to wave soldering at 250° C, 5 sec.

• Choice of straight or right angle PCB mounting

• Saline mist 24 hours, 96 hours (tropicalised version),

• Damp heat 4 days, 21 days (tropicalised version),

• Electrical life 1 000 operations

Nominal Curent

500 mA

Minimum Curent

Nominal Voltage

Maximum Voltage

Minimum Voltage

Electrostatic breakdown value

Isolation resistance

Contact resistance

Electrical life

Electric strength as per EN IEC 60512-2

1 mA

12 V

24 V

10 mV

5 kV

≥10000 MΩ at 100Vdc

≤22 Ω

1000 actuations

Switching action

Actuating travel

1.6 mm

Operating temperature

Shock resistance as per IEC 60512-4-6c

Environnemental resistance

- Damp heat

-40°C ... +85°C

50 g, 11 ms

as per EN IEC 60512-11f

Change-over slide switch 1-pole

09.03290.01

09.03201.02

09.03290.01X116

09.03201.02X115

19.03201.01

09.10290.01

09.10201.02

Pins axial (standard version), plastic black raised slider

Pins axial (standard version), plastic red slider

Pins axial (3 mm), plastic black raised slider

Pins axial (3 mm), plastic red slider

Pins axial (tropicalised version), plastic red slider

Pins bent at right-angles (standard version) plastic black raised slider

Pins bent at right-angles (standard version) plastic red

slider

Further options and information available: www.eozonline.com

• Cursor position

Pins axial (standard version),

Red plastic slider

Right-angles bented pins (standard version)

Black raised plastic slider

250 Vrms, 50 Hz, 1 min

- Saline mist

24 hours

96 hours

4 days

21 days

Tropical «Gold cont.»

Standard «Gold cont.»

as per EN IEC 60512-11f

The 1K2 is designed for machine wave flow soldering.

If manual soldering needs to be done, the following guidelines have to

be adhered to (in accordance to IEC 60068-2-20):

Manual spot welding guideline

•Type of solder: Sn/Ag/Cu

•Soldering temperature: 350°C at 370°C

•Soldering time: 1s at 5s max

•In order to avoid overheating, a small break has to be observed

between each solder-application

•The soldering iron has to be kept clean at all times.

•It is mandatory to tin the tip of the soldering iron before the solde-

ring can take place.

•When soldering, the tip of the iron has to first pre-heat the «inter-

section» between pin and circuit, before applying the solder.

Size of tip of soldering iron: 3mm dia.

Electrical life 1 000 operations

CONNEXIONS

MOUNTING

Pins axial (standard

version), Black raised plastic

Right-angles bented pins (standard version)

Red plastic slider

MECHANICAL CHARACTERISTICS

Maintained

Part Numbers