Automotive Relays TB RELAYS

T1

T3

T2

t1

t2

t3

t1=60 to 120 s

t2=Less than 30 s

t3=Less than 5 s

T1=150 to 180°C

T2=230°C or more

T3=Less than 250°C

1) Cautions for mounting

(1) The temperature profile shows the temperature at the

soldering portion on the PC board surface.

(2) Depending on the mounting density condition, reflow heating

method, and PC board type (metal etc.), the relay’s exterior

and interior temperature may become extremely high.

Therefore, please confirm well under the actual use condition

before use.

2) The other cautions of reflow soldering

(1) When soldering condition is out of recommendation, the

relay performance may be adversely affected. If soldering

conditions are out of our recommendation, please inquire our

sales representative before operation.

(2) Please check the effect at the actual soldering because

heat stress to relay is changed by PC board type and

manufacturing process condition

(3) Solder creepage, wettability or soldering strength will be

affected by the mounting condition or soldering material.

Please check the actual production condition in detail.

(4) Do not wash the relay as failures may occur.

(5) This product is not plastic sealed type. Please perform

coating with sufficient attention to avoid infiltration of the

solvent to the inside. Also, please pay careful attention to use

and store them with no contamination of foreign material.

Mounting and cleaning conditions for Pin in Paste

compliant type

When soldering this relay, please observe the following

conditions.

[I.R.S method (recommended)]

(Recommended number of reflows 1 time)

Please refer to

"the latest product specifications"

when designing your product.

•Requests to customers:

https://industrial.panasonic.com/ac/e/salespolicies/

ASCTB95E 202204

Panasonic Industry Co., Ltd. 2022

ー 10 ー

Panasonic Industry Co., Ltd. Electromechanical Control Business Division

industrial.panasonic.com/ac/e/