EL-USB-1-LCD

Temperature Data Logger with LCD

www.lascarelectronics.com

DISPLAY AND STATUS FUNCTIONS

The EL-USB-1-LCD features a high contrast LCD and two LEDs. The LCD shows logged temperature values and can also show information

regarding the logging status.

Temperature

scale

Minimum logged

value symbol

Maximum logged

value symbol

Reading

Negative symbol

The LCD shows three different recorded readings, which can be cycled through using the built-in push button. The most recent logged

temperature, maximum logged temperature and minimum logged temperature can be displayed. In addition, logging and alarm status is

shown using two high intensity LEDs.

LCD INDICATION

Delayed Start

Push to Start

Logging

Stopped

This is shown when the logger is set to

start at a specific data and time*

This is shown when the logger is setup

for “Push to start” logging

This is shown when the logger is running

in “LCD off” mode, and the button is

pressed. The display clears again after

three seconds

If the logger has not been set to log and

the button is pressed, three dashes are

displayed for three seconds

* If the logger is set to “LCD off” or “LCD on for 30 seconds” mode, then this will only be shown

after the button is pressed. Otherwise the display will remain blank.

Display

Logger Status

Explanation

Specifications liable to change without prior warning

Issue 3

03/2011

S.L

Applies to EL-USB-1-LCD

Page 2 of 5