EL-USB-1-LCD

Temperature Data Logger

with LCD

Specifications liable to change without prior warning

Issue 3

03/2011

S.L

Applies to EL-USB-1-LCD

Page 1 of 5

FEATURES

• -35 to +80°C (-31 to +176°F) measurement range

• USB interface for set-up and data download

• User-programmable alarm thresholds

• Status indication via red, green and orange LEDs

• High contrast LCD, with two and a half digit temperature

display function

• Immediate, delayed and push-to-start logging

• Supplied with replaceable internal lithium battery and

Windows control software

ORDERING INFORMATION

Standard Data Logger

(Data Logger, Software on

CD, Battery)

Replacement Battery

EL-USB-1-LCD

BAT 3V6 1/2AA

www.lascarelectronics.com

This standalone data logger measures and stores up to 16,378 temperature readings over a -35 to +80°C (-31 to +176°F) range. The user

can easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and running

the purpose designed software under Windows 2000, XP, Vista, and 7. Data can then be graphed, printed and exported to other applications.

The high contrast LCD can show a variety of temperature information. At the touch of a button, the user can cycle between the current,

maximum and minimum stored temperatures. The data logger is supplied complete with a long-life lithium battery, which can typically allow

logging for up to 1 year. The data logger is protected against moisture to IP67 standard when the protective cap is fitted.

* At 25

°C and 1 minute logging rate

Specifications

Minimum

Typical

Maximum

Unit

Measurement range

-35 (-31)

+80 (+176)

°C (°F)

Internal resolution

0.5 (1)

°C (°F)

Accuracy (overall error)

±0.5 (±1)

±1.5 (±3)

°C (°F)

Logging rate

every 10s

every 12hr

-

Operating temperature range

-35 (-31)

+80 (+176)

°C (°F)

1/2AA 3.6V Lithium Battery life

1*

Year

Lascar’s EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the control software runs

under Windows 2000, XP, Vista & 7. The software is used to set-up the data logger as well as download, graph and export data to Excel.

EL-WIN-USB (CONTROL SOFTWARE)

The software allows the following parameters to be configured:

• Logger name

• °C, °F

• Logging rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr)

• High and low alarms

• Immediate, delayed and push-to-start logging

• Display off, on for 30 seconds after button press, or permanently on

• Data rollover (allows unlimited logging periods by overwriting the oldest

data when the memory is full)

The latest version of the control software may be downloaded free of charge from www.lascarelectronics.com