TXG102x-Q1 2-bit, ±10V Ground-Level Translator

1 Features

• AEC-Q100 qualified for automotive applications

• Supports DC shifts up to ±10V

• AC Noise Rejection of 20VPP up to 45MHz

• CMTI of 1kV/µs

• Low Prop Delay (<5ns) and Ch-Ch Skew (<0.20ns)

• Greater than 250Mbps

• Low power consumption (0.8mA per channel at

1Mbps, 1.8V)

• Fully configurable dual-rail design allows each port

to operate from 1.71V to 5.5V

• 4, 2, 1 channel devices with multiple configurations

will be available

• Two device variants:

– TXG1020-Q1: 2 forward

– TXG1021-Q1: 1 forward, 1 reverse

• Supports VCC disconnect feature (I/Os are forced

into high-Z)

• Schmitt-trigger inputs allows for slow and noisy

signals

• Inputs with integrated static pull-down resistors

prevent channels from floating

• Operating temperature from –40°C to +125°C

• Latch-up performance exceeds 100mA per JESD

78, class II

– ESD protection exceeds JESD 22

– 4000V human-body model

– 500V charged-device model

• Package options provided:

– DSG (WSON-8)

– DDF (SOT-8)

– D (SOIC-8)

System #1

System #2

INx

OUTx

VccA

GndA

VccB

GndB

TXG

VccA

GndA

VccB

GndB

Parasi c capacitance/

resistance <10V

Simplified Diagram

2 Applications

• Electric Power Steering

• Vehicle Control Unit

• Automotive Display

• Head Unit and Digital Cockpit

3 Description

The TXG102x-Q1 is a 2-bit, fixed direction, non-

galvanic based voltage and ground-level translator

that can support both logic-level shifting between

1.71V to 5.5V and ground-level shifting up to

±10V. Compared to traditional level shifters, the

TXG102x-Q1 family can solve the challenges of

voltage translation across different ground levels. The

Simplified Diagram shows a common use case where

DC shift occurs between GNDA to GNDB due to

parasitic resistance or capacitance.

VCCA is referenced to GNDA and VCCB is referenced

to GNDB. Ax pins are referenced to VCCA logic level

while Bx pins are referenced to VCCB logic levels.

Both A port and B port can accept voltages from

1.71V to 5.5V. The leakage between GNDA and

GNDB is <40nA when VCC to GND is shorted.

The TXG102x-Q1 device helps improve noise

immunity and power sequencing across different

ground

domains

while

providing

low

power

consumption, latency and channel-to-channel skew.

It can supress noise levels of 20VPP up to 45MHz

(Figure 7-3). This device can support multiple

interfaces such as UART, GPIO, and JTAG.

Package Information

PART

NUMBER

PACKAGE (1)

BODY SIZE (NOM)

TXG1020-Q1

TXG1021-Q1

DSG (WSON-8)

2.0mm × 2.00mm

DDF (SOT-8)

2.90mm × 1.60mm

D (SOIC-8)

4.90mm × 3.90mm

(1)

For all available packages, see the orderable addendum at

the end of the data sheet.

TXG1020-Q1, TXG1021-Q1

SCES998 – MAY 2025

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. ADVANCE INFORMATION for preproduction products; subject to change

without notice.