BQ40Z50RSMR-R2 datasheet(41/55 Pages) TI2

Teilenummer	BQ40Z50RSMR-R2

Bauteilbeschribung	BQ40Z50-R2 1-Series, 2-Series, 3-Series, and 4-Series Li-Ion Battery Pack Manager

PDF	55 Pages

Scroll/Zoom	100%

Hersteller	TI2 [Texas Instruments]

Direct Link	https://www.ti.com

Logo

41 / 55 page

10 Power Supply Recommendations

The device manages its supply voltage dynamically according to the operation conditions. Normally, the BAT

input is the primary power source to the device. The BAT pin should be connected to the positive termination of

the battery stack. The input voltage for the BAT pin ranges from 2.2 V to 26 V.

The VCC pin is the secondary power input, which activates when the BAT voltage falls below minimum VCC. This

enables the device to source power from a charger (if present) connected to the PACK pin. The VCC pin should

be connected to the common drain of the CHG and DSG FETs. The charger input should be connected to the

PACK pin.

www.ti.com

BQ40Z50-R2

SLUSCS4C – JUNE 2017 – REVISED APRIL 2021

Submit Document Feedback

Product Folder Links: BQ40Z50-R2

BQ40Z50RSMR-R2 Datenblatt(PDF) 41 Page - Texas Instruments