diodes.com

Announcement

New Product

The PI2DPX1067 is a 1.8V linear ReDriver

supporting USB Type-C for 10Gbps

USB 3.2, and 13.5Gbps DisplayPort 2.1

(UHBR13.5) standards.

The device supports multiple operation modes

through an I2C bus setting for:

•

USB 3.2 Gen 2 x1 or x2

•

USB 3.2 Gen 2 x1 and 2-lane DP 2.1

(UHBR10, UHBR13.5)

•

4-lane DP 2.1 (UHBR10, UHBR13.5)

-with speeds up to 13.5Gbps per channel.

In compliance to USB Type-C connectors with

crossbar switches for SBU pins, the device

integrates an AUX listener and swaps AUX

channels under the flip and non-flip plug.

The PI2DPX1067’s non-blocking linear

ReDriver design ensures that the differential

signals help optimize the overall channel link

adjustment conducted by the system’s

transmitter and receiver. These differential

signals convey pre-shoot and de-emphasis

equalization waveforms from the transmitter

side to the receiver side.

The device’s CTLE equalizers are

implemented at the inputs of the ReDriver to

compensate for channel losses and to reduce

intersymbol interface (ISI) jitter. The CTLE

equalizer’s gains and flat gains are

programmable to support eye opening via the

I2C register.

The PI2DPX1067 is available in the very small

32-pin X2QFN (XUA32) with a 2.85mm x

4.5mm footprint. It operates across the -40

C

to +85

C industrial temperature range.

ReDriver is a trademark of Didoes Incorporated.

The Diodes logo is a registered trademark of Diodes

Incorporated in the United States and other countries.

All other trademarks are the property of their respective

owners.

© 2025 Copyright Diodes Incorporated. All Rights

Reserved.

1.8V, 13.5Gbps Linear ReDriver with AUX Listener for

Full Functionality in USB Type-C® Connectivity

PI2DPX1067

December 2025

Applications

▪ Laptops and desktop PCs

▪ VR/AR goggles

▪ Gaming consoles

▪ Active cables

The DIODES Advantage

The PI2DPX1067 is a low-power, 13.5Gbps linear ReDriver

supporting USB 3.2 and DP 2.1 Alt Mode for full functionality in

USB Type-C connectivity.

▪ Flexible USB Type-C (USB 3.2/DP Alt Mode) Operation

▪ 1-port USB 3.2 Gen 2 x1 (SuperSpeed USB 10Gbps)

▪ 1-port USB 3.2 Gen 2 x1 + 2-channel DisplayPort 2.1

(UHBR13.5)

▪ 4-channel DisplayPort 2.1 (UHBR13.5)

▪ 1-port USB 3.2 Gen 2 x2 (SuperSpeed USB 20Gbps)

▪

Programmable Receiver-Side CTLE, Output-Side Flat Gain,

and Swing Linearity Settings

Extends PCB trace lengths while reducing signal latency,

optimizes signal integrity (SI) with AUX listening data rates, and

loads the EQ/FG pre-settings

▪ Automatic Power-Saving Modes for Both USB and DP

Supports USB (U2/U3) and DP (D3) power-saving modes with a

built-in AUX listener, as well as DP 2.1 AUX-less advance link

power management (ALPM)

▪ Programmable Settings via I2C

Enables flexible control and setup for ease of use