Construction

Handle which includes miniature thermocouple socket into which any one of the TME plug

mounted probes may be inserted. Complete with 2M curly polyurethane cable with moulded

connector. Complete waterproof assembly.

Sensor Features

 TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY.

This results in a solid handle as opposed to a hollow handle. This is particularly important as

there is often damage to the handles caused by excess heat. With a hollow handle it is possible

to puncture the outer plastic and damage the sensor irreparably.

 WATERPROOF HANDLE

Due to the total encapsulation method used, all TME probe handles are completely waterproof.

 TOUGH POLYURETHANE CABLE



Polyurethane cables are used in place of the standard PVC for the following reasons :-



Greater retractability



Enhanced memory of its curl



Non–Toxic



Greater mechanical strength for durability



12 X 0.2mm wires used internally for greater strength.



PTFE inner insulation for strength and retractability.

 HIGH ACCURACY THERMOCOUPLE MATERIAL THROUGHOUT

Type ‘K’ Thermocouple

: Class I

(±1.5°C ±0.25%)

 POLYPROPYLENE HANDLES

Polypropylene is an extremely tough and durable material, commonly used for milk crates, it

has good low temperature performance and a relatively high melt temperature. It performs

exceptionally well under chemical attack.

 WIDE AMBIENT TEMPERATURE SPECIFICATION

: –50 TO 50 °C

Cross-reference for compatible instruments

Suitable instruments for use with this probe

RS PART No

DESCRIPTION

APPLICATION

MM2000

SINGLE INPUT INSTRUMENT

HIGH ACCURACY TEMPERATURE MEASUREMENT

MM2008

SINGLE INPUT THERMOMETER with 1 &

2 MINUTE TIMERS

LEGIONELLA TEMPRATURE MONITORING

MM2010

MAX / MIN HOLD INSTRUMENT

HIGH ACCURACY INSTRUMENT WITH MAX, MIN AND HOLD FEATURES

MM2020

DIFFERENTIAL INSTRUMENT

DUAL INPUT INSTRUMENT FOR DIFFERENTIAL MEASUREMENTS

MM2030

THERMOCOUPLE SIMULATOR

HIGH ACCURACY SIMULATOR WITH MEASUREMENT FACILITY