ISO7240CFDW datasheet(3/16 Pages) TI

3 / 16 page

ELECTRICAL CHARACTERISTICS

SWITCHING CHARACTERISTICS

ISO7240CF

www.ti.com ................................................................................................................................................ SLLS869B – SEPTEMBER 2007 – REVISED APRIL 2008

VCC1 and VCC2 at 5-V operation, over recommended operating conditions (unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

Quiescent

ICC1

Supply current

VI = VCC or 0 V, all channels, no load

25 Mbps

10.5

Quiescent

ICC2

Supply current

VI = VCC or 0 V, all channels, no load

25 Mbps

IOFF

Sleep mode output current

DISABLE at VCC, single channel

µA

IOH = –4 mA, See Figure 1

VCC – 0.4

VOH

High-level output voltage

IOH = –20 µA, See Figure 1

VCC – 0.1

IOL = 4 mA, See Figure 1

0.4

VOL

Low-level output voltage

IOL = 20 µA, See Figure 1

0.1

VI(HYS)

Input voltage hysteresis

200

IIH

High-level input current

IN, DISABLE, CTRL from 0 V to VCC

µA

IIL

Low-level input current

–10

Input capacitance to ground

IN at VCC, VI = 0.4 sin (4E6πt)

CMTI

Common-mode transient immunity

VI = VCC or 0 V, See Figure 4

kV/

µs

VCC1 and VCC2 at 5-V operation, over recommended operating conditions (unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

tPLH, tPHL

Propagation delay, low-to-high-level output

See Figure 1

PWD

Pulse-width distortion |tPHL – tPLH|

(1)

2.5

tsk(pp)

Part-to-part skew (2)

tsk(o)

Channel-to-channel output skew (3)

Output signal rise time

See Figure 1

Output signal fall time

twake

Wake time from input disable

See Figure 2

µs

tfs

Failsafe output delay time from input power loss

See Figure 3

µs

(1)

Also referred to as pulse skew.

(2)

tsk(pp) is the magnitude of the difference in propagation delay times between any specified terminals of two devices when both devices

operate with the same supply voltages, at the same temperature, and have identical packages and test circuits.

(3)

tsk(o) is the skew between specified outputs of a single device with all driving inputs connected together and the outputs switching in the

same direction while driving identical specified loads.

Submit Documentation Feedback

Product Folder Link(s) :ISO7240CF

ISO7240CFDW Datenblatt(PDF) 3 Page - Texas Instruments

ISO7240CFDW Datenblatt(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Datenblatt Download

Link URL