QST104 datasheet(23/45 Pages) STMICROELECTRONICS

23 / 45 page

QST104

Device operating modes

23/45

Key activation description

Key activation (Bit 7)

0: Key enabled

1: Key disabled

Key identifier (Bits 3:0)

0000: All keys

0011: Key 3

0001: Key 1

0100: Key 4

0010: Key 2

Low power mode description

Free Run in Detect (Bit 6)

0: Low Power mode is always enabled, whatever the state of the keys.

1: Low Power mode is automatically suspended when any key is in Detect state.

Low Power mode is automatically resumed when no key is in Detect state.

Sleep Duration Factor (Bits 5 to 0)

0x00 or 0x20 to 0x3E: Low power mode is disabled.

0x01 to 0x19: Low Power mode. The sleep duration is ‘Sleep Duration Factor’ x 20

milliseconds (20 ms to 500 ms)

0x3F: Deep Sleep mode is entered immediately. Only a reset or an I2C frame with

the correct device address allows exiting Deep Sleep mode.

Note:

When the device is in Sleep or Deep Sleep, any I2C bus activity will wake-up the device.

2The I2C QST device address is not acknowledged but forces the QST device to exit from

Low Power mode. The Master device will have to repeat the command to ensure that it is

taken in account.

Table 14.

KeyActivation

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

Key

Activation

Key ID (binary coded)

Table 15.

SetLowPower

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

Free Run

in Detect

Sleep Duration Factor

QST104 Datenblatt(PDF) 23 Page - STMicroelectronics

QST104 Datenblatt(HTML) 23 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Datenblatt Download

Link URL