BPX 82

DATASHEET

DATASHEET

13 | Version 1.4 | 2023-06-06

Glossary

1)

Photocurrent: The photocurrent values are measured (by irradiating the devices with a homogenous

light source and applying a voltage to the device) with a tolerance of ±11 %.

2)

Tolerance of Measure: Unless otherwise noted in

drawing, tolerances are specified with ±0.1 and

dimensions are specified in mm.

3)

IPCEmin: IPCEmin is the min. photocurrent of the specified group.

4)

Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-

es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. 

These do not necessarily correspond to the actual parameters of each single product, which could dif-

fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.

because of technical improvements, these typ. data will be changed without any further notice.

5)

Testing temperature: TA = 25°C (unless otherwise specified)

6)

Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and 

dimensions are specified in mm.