www.panduit.com

LC Fiber Optic Connectors

SPECIFICA TION SHEET

applications

Panduit LC Fiber Optic Connectors provide a

rugged solution for high-density telecommunication

rooms, LANs, public networks and fiber-to-the-desk

applications. LC simplex and duplex connectors

are used for equipment cross-connects or

interconnects in backbone, horizontal and

work area applications for high-speed data

transmissions. The high-density design and

1.25mm ferrules double the port density

(compared to SC connectors) to reduce space

requirements on racks, enclosures, panels

and faceplates.

technical information

Standards requirements:

TIA/EIA-604 FOCIS-10 compatible; exceeds

TIA/EIA-568-B.3 requirements

Fiber compatibility:

62.5/125μm OM1, 50/125μm OM2,10Gig™ 50/125μm laser

optimized OM3/OM4 and 9/125μm OS1

Fiber cable type:

900μm tight-buffered fiber recommended

250μm coated fiber, by using F250BT-C 250 micron

fiber build-up tube kit or FO6CB or FO12CB fan-out kit

Jacketed cable size:

1.6mm – 2.0mm jacketed cable

Ferrule type:

Zirconia ceramic

Insertion loss:

0.1dB average (multimode and singlemode)

Return loss:

>20dB (multimode), >40dB (singlemode)

specifications

LC small form factor (SFF) field polish connectors with rear pivot

latch shall be TIA/EIA-604 FOCIS-10 compatible. LC simplex and

duplex connectors shall be field terminable. The fibers shall

terminate in 1.25mm ceramic ferrules with non-optical disconnect

functionality and an average insertion loss of 0.1dB per mated

pair for multimode and singlemode fiber.

key features and benefits

Rear pivot latch design,

robust construction

Longer beam reduces deflection during mating and unmating to reduce

latch fatigue, leading to longer cycle life

Anti-snag latch

Low profile latch resists cable snagging

Wide “positive grip”

thumb latch

Multi-grooved, full body width thumb latch improves grip for

better control during matings/unmatings; promotes fast, easy

MACs (moves, adds, changes) in high-density applications

Audible “click” upon

successful mating

Provides user with a definitive signal of successful connector mating

Field installable duplex

clip with integrated

polarity markers

Allows fast, easy field polarity changes without tools; quick

identification of polarity

One connector body

design for both simplex

and duplex applications

A single connector design is used for both simplex and duplex patch

cords and inside the wall applications to simplify installation

Protective cap locks onto

connector latch with

audible “click”

Protective cap automatically locks onto connector latch, completely

covering connector end; prevents ferrule end face damage by providing

protection from contamination and impact

Anaerobic adhesive

field installation

Simplifies and reduces installation time by 50% compared to heat

cured epoxy terminations; curing oven/time not required

Rugged body construction Stable performance under side loads for improved reliability

Independent

free-floating ferrules

Ensures physical fiber contact for consistent low return loss, unlike

unitary multi-fiber ferrule connectors

1.25mm ceramic

ferrules

Provide the highest durability for repeated matings

LC Simplex Fiber Optic Connectors

for 900μm Buffered Fiber and

1.6mm – 2.0mm Jacketed Cable

OM1 Multimode:

FLCSMEIY

OM2, OM3, OM4

Multimode:

FLCSMBLY

OS2 Singlemode:

FLCSSBUY

LC Simplex Fiber Optic Connectors

for 3.0mm Jacketed Cable

OM1 Multimode:

FLCSM3.0EI

OM2, OM3, OM4

Multimode:

FLCSM3.0BL

OS2 Singlemode:

FLCSS3.0BU

LC Duplex Fiber Optic Connectors

for 900μm Buffered Fiber

MOM1 Multimode:

FLCDM900EIY

OM2, OM3, OM4

Multimode:

FLCDM900BLY

OS2 Singlemode:

FLCDS900BUY

LC Duplex Fiber Optic Connectors

for 1.6mm – 2.0mm Jacketed Cable

OM1 Multimode:

FLCDMEIY

OM2, OM3, OM4

Multimode:

FLCDMBLY

OS2 Singlemode:

FLCDSBUY

LC Duplex Fiber Optic Connectors

for 3.0mm Jacketed Cable

OM1 Multimode:

FLCDM3.0EI

OM2, OM3, OM4

Multimode:

FLCDM3.0BL

OS2 Singlemode:

FLCDS3.0BU

Mini-Com® Sr./Jr. LC Adapter Modules

1Duplex MM:

CMDJLC**

Duplex 10 GbE (zirc.): CMDJAQLCZBL

Duplex SM (zirc.):

CMDJLCZ**

For Sr./Sr., replace J in part number with S.

Opticom® LC Fiber Adapter Panels

16 duplex 10 GbE (zirc.): FAP6WAQDLCZ

6 duplex MM:

FAP6WEIDLC

6 duplex SM (zirc.):

FAP6WBUDLCZ

12 duplex MM:

FAP12WEIDLC

12 simplex SM (zirc.): FAP12WBULCZ

QuickNet™ MTP* Cassettes

6 LC to MTP* (12f):

FC^-12-10Y

12 LC to 2 MTP* (24f): FC^-24-10Y

QuickNet™ Optimized 10 GbE

MTP* Cassettes

6 LC to MTP* (12f):

FCXO-12-10Y

12 LC to 2 MTP* (24f): FCXO-24-10Y

Opti-Core® Fiber Optic Patch Cords

Duplex LC to LC:

F^E10-10M‡Y

Simplex LC to LC:

F^F10-10M‡Y

Duplex SC to LC:

F^E3-10M‡Y

Simplex SC to LC:

F^F3-10M‡Y

Simplex LC to pigtail: F^B10-NM‡Y

LC Termination Tooling

110V termination kit: FIELDKIT

230V termination kit: FIELDKIT-G

Refurbishment kit:

FIELDKITRFB

HD Connector Removal Tool

For LC and SC:

HDCRT

LC Lock-in Duplex Clip

LC lock-in duplex clip: FLCCLIW-X

**Substitute for module color:

EI = Electric Ivory

BU = Blue

IG = International Gray

WH = White

TG = Technical Gray

BL = Black

AW = Arctic White

W = Off White

EW = European White

^Substitute for fiber type: Z (OM4-10 GbE

50/125μm), X (OM3-10 GbE 50/125μm),

5 (OM2-50/125μm), 6 (OM1-62.5/125μm)

or 9 (OS1-9/125μm).

‡Substitute for length in meters: 1, 2, 3, 5

or 10 for patch cords, and 1, 2 or 3 for pigtails;

singlemode patch cords are also available

in 12, 15, 25 or 30 meter lengths. Contact

Customer Service for other available lengths.