423

4.4

Further information at www.HellermannTyton.co.uk/installation

Electrical Installation

Downlight Covers

Features and benefits

• SpotClip-II has been developed for bulbs up to 95 mm height

• Ensures safety distance between downlight, damp-proof foil and

insulation material

• Flexible installation during or after construction

• Additional spikes at the end of the legs prevent SpotClip shifting

• Suitable for fixing into holes from 62 - 90 mm diameter

• Remains rigid even at higher temperatures

• Flame retardant material according to UL94-V0

• Improves life span and reliability of lamps

• Tested according to EN 60598-1, EN 60598-2-2, and NF C 15100

Downlight Covers - For Residential Buildings

SpotClip-II

1. Use the delivered tool to install

SpotClip-II in the fixing hole as easy

as possible.

2. Push the spikes into the

plasterboard to prevent shifting and

disconnect the tool.

Retaining spikes and support wings hold SpotClip-II in the required position.

3. Start the installation of the

downlight in a safe way.

SpotClip-I and SpotClip-II for maximum downlight heights of 70 mm and 95 mm

respectively.