SPECIFICATION SHEET

www.panduit.com

specifications

The vertical cable manager shall be capable of mounting to

EIA racks to manage cables on the front and rear of the rack.

The manager shall be molded out of plastic and possess

cable management fingers and pass through holes. The

fingers shall provide integral bend radius control and be

spaced so that the gaps between the fingers align with EIA

rack spaces. The pass through holes shall provide bend

radius control and slots that can be used for securing of cable

straps. The vertical manager shall have a dual hinged cover

that can be opened to the left or right 110 degrees. The

manager shall be able to accept wire retainers that can be

snapped on to the cable management fingers.

NetRunner™ Vertical Cable Managers

NetRunner™ Vertical Cable Managers

Front and rear

22 RU, 4' x 5":

WMPV22E

45 RU, 4" x 5":

WMPV45E

45 RU, 6" x 6":

WMPVHC45E

Front only

22 RU, 4" x 5":

WMPVF22E

45 RU, 4" x 5":

WMPVF45E

45 RU, 6" x 6":

WMPVHCF45E

Replacement Covers

4" wide:

WMPVHRCE

6" wide:

WMPVHCRCE

Standard 2 Post Racks – 7 Foot

19" mount:

R2P

19" mount:

R2PS

23" mount:

R2PW

4 Post Racks, 19" Mount – 7 Foot

23" deep:

R4P23*

30" deep:

R4P*

36" deep:

R4P36*

42" deep:

R4P42*

*Add “CN” for Cage Nut Rails

NetManager™ High Capacity

Horizontal Cable Managers

Front and rear

1 RU:

NM1

2 RU:

NM2

3 RU:

NM3

4 RU:

NM4

Front only

1 RU:

NMF1

2 RU:

NMF2

3 RU:

NMF3

4 RU:

NMF4

PatchLink™ Horizontal Cable Managers

Front and rear, 2 RU: WMP1E

Front and rear, 1 RU: WMPSE

Front only, 2 RU:

WMPF1E

Front only, 1 RU:

WMPFSE

Accessories

Center mount

bracket kit:

WMPVCBE

(For use with EIA standard racks)

Side mount

hardware kit:

WMPVSMK

(For use with Panduit R2PS and 7

foot R4P series of 4 post racks)

Rack adapter

bracket kit:

WMPVCMB

(For use with racks with dimensions

up to 1 5/8" (41.1mm) from outside

edge of the rack to the center of

the mounting hole)

Cable retainers:

(Package of 10)

WR5E-X

Rack top trough

with waterfall:

WMPVWF

End panel:

WMPV45EPB1

(For use with WMPV45E)

NREPB1

End panel:

(For use with WMPVHC45E)

technical information

Temperature ratings: Max storage temperature 65°C (149°F);

Max operating temperature 60°C (140°F)

Packaging:

Managers include hinged covers, mounting brackets and #12 – 24 screws

Mounting options:

When attached to the side of a standard 19" EIA rack, the pitch of a WMPV

vertical manager is 25.3" and the pitch of a WMPVHC vertical manager is 27.1".

Managers can be center mounted between two adjacent EIA 19" or 23" racks by

using the WMPVCBE bracket kit.

Managers can be mounted to Panduit R2PS and 7 foot R4P series of 4 post racks

by using the WMPVSMK hardware kit; two kits are needed for center mounting.

Managers can be side or center mounted to the front or rear of a rack with

dimensions of up to 1 5/8" (41.1mm) from the outside edge of a rack to the center

of the mounting hole by using the WMPVCMB bracket kit; two kits are needed for

center mounting; when attached to the side of a 19" rack using a WMPVCMB

bracket kit, the pitch of a WMPV vertical manager is 25.8" and the pitch of

WMPVHC vertical manager is 27.6".

Panduit® NetRunner™ Vertical Cable Managers

provide a cost-effective solution that organize,

manage, and protect network cabling in

telecommunication rooms and data centers. Cable

management fingers simplify cable routing during

installation and maintenance. Bend radius control

helps protect cables from kinks, snags, and

crushing, ensuring system performance

and reliability. Multiple sizes and mounting options

allow for use in a variety of applications. When

used with Panduit® Mini-Com® Patch Panels, patch

cords, horizontal cable managers and racks, the

user receives a complete end-to-end solution that

satisfies functional requirements and showcases

network cabling.

key features and benefits

Bend radius fingers

Align with rack spaces to support cables as they transition to the

vertical pathway; pass through holes maintain cable bend radius

ensuring network performance and reliability

Large finger opening

Each accommodates up to 24 Category 6 cables eliminating

the need to remove fingers for cable routing speeding installation

and maintenance

Dual hinged cover

Can be opened 110 degrees to the left or right to provide complete

access to the cables inside the vertical pathway

Integral cable retainers

On the end of each finger to help contain cables within each rack

unit to simplify installation and maintenance

applications

Part Number

Dimensions

RU

Height In. (mm)

Width In. (mm)

Depth In. (mm)

WMPV22E

22

41.5 (1054)

4.9 (125)

12.0 (306)

WMPVF22E

22

41.5 (1054)

4.9 (125)

6.5 (165)

WMPV45E

45

83.0 (2108)

4.9 (125)

12.0 (306)

WMPVF45E

45

83.0 (2108)

4.9 (125)

6.5 (165)

WMPVHC45E

45

83.0 (2108)

6.7 (170)

14.1 (357)

WMPVHCF45E

45

83.0 (2108)

6.7 (170)

7.6 (192)