STPCE1EDBI datasheet(71/87 Pages) STMICROELECTRONICS

Teilenummer	STPCE1EDBI

Bauteilbeschribung	X86 Core General Purpose PC Compatible System - on - Chip

PDF	87 Pages

Scroll/Zoom	100%

Hersteller	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

71 / 87 page

DESIGN GUIDELINES

Release 1.3 - January 29, 2002

71/87

This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.

6.4. PLACE AND ROUTE

RECOMMENDATIONS

6.4.1. GENERAL RECOMMENDATIONS

Some STPC Interfaces run at high speed and

need to be carefully routed or even shielded like:

1) Memory Interface

2) PCI bus

3) 14 MHz oscillator stage

All clock signals have to be routed first and

shielded for speeds of 27MHz or higher. The high

speed signals follow the same constraints, as for

the memory and PCI control signals.

The next interfaces to be routed are Memory and

PCI.

All the analog noise-sensitive signals have to be

routed in a separate area and hence can be

routed indepedently.

Figure 6-15. Shielding signals

ground ring

ground pad

shielded signal line

ground pad

shielded signal lines

STPCE1EDBI Datenblatt(PDF) 71 Page - STMicroelectronics