5

 2004 Semtech Corp.

www.semtech.com

PROTECTION PRODUCTS

PROTECTION PRODUCTS

SMS05 through SMS24

SMSxx Circuit Diagram

Protection of Four Unidirectional Lines

Device Connection for Protection of Four Data Lines

The SMSxx is designed to protect up to four unidirec-

tional data lines. The device is connected as follows:

1. Unidirectional protection of four I/O lines is

achieved by connecting pins 1, 3, 4 and 6 to the

data lines. Pin 2 and 5 are connected to ground.

The ground connections should be made directly to

the ground plane for best results. The path length

is kept as short as possible to reduce the effects

of parasitic inductance in the board traces.

Circuit Board Layout Recommendations for Suppres-

sion of ESD

Good circuit board layout is critical for the suppression

of ESD induced transients. The following guidelines are

recommended:

Place the SMSxx near the input terminals or con-

nectors to restrict transient coupling.

Minimize the path length between the SMSxx and

the protected line.

Minimize all conductive loops including power and

ground loops.

The ESD transient return path to ground should be

kept as short as possible.

Never run critical signals near board edges.

Use ground planes whenever possible.

Matte Tin Lead Finish

Matte tin has become the industry standard lead-free

replacement for SnPb lead finishes. A matte tin finish

is composed of 100% tin solder with large grains.

Since the solder volume on the leads is small com-

pared to the solder paste volume that is placed on the

land pattern of the PCB, the reflow profile will be

determined by the requirements of the solder paste.

Therefore, these devices are compatible with both

lead-free and SnPb assembly techniques. In addition,

unlike other lead-free compositions, matte tin does not

have any added alloys that can cause degradation of

the solder joint.

Applications Information