NLP70 datasheet(2/3 Pages) EMERSON-NETWORKPOWER

2 / 3 page

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

Notes

Free air convection cooling.

I5 = 10.5 A max.; I3.3 = 10.5 A max.; I3.3 + I5 < 10.6 A; Po = 52.5 W max.

20 CFM forced air.

I3.3 = 13 A max.; I5.5 = 13 A max.; I3.3 + I5 < 15 A; Po = 70 W max.

Peak output current lasting less than 60 seconds with duty cycle less

than 5%. During peak loading, output voltage may exceed total

regulation limits.

Figure is peak-to-peak for convection power rating. Output noise

measurements are made across a 20 MHz bandwidth using a 6 inch

twisted pair, terminated with a 10 µF electrolytic capacitor and a 0.1 µF

ceramic capacitor.

Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G

rms 5 Hz to 500 Hz.

To maintain stated regulation then:

I12 / I(A) ≤2 and I(A) ≥0.1 A.

For optimum reliability, no part of the heatsink should exceed 120 ºC,

and no semiconductor case temperature should exceed 130 ºC.

CAUTION: Allow a minimum of 1 second after disconnecting line power

when making thermal measurements.

This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

10 Conducted and radiated emissions testing were performed using the

standard EN55022 set-up with a stand alone NLP70-9693J unit placed

on a grounded metal plate with a line choke on the AC input and ground

wires (i.e. the wires are looped through an EMI suppression toroid).

For system compliance it is usually necessary to install an ‘off-the-shelf’ ac

inlet with an integral line filter in the system chassis or to install a line

choke on the input wires as close as possible to ac entry point of the

system chassis. Please contact the applications group at Artesyn for

assistance with EMI compliance.

11 All models require a minimum mounting stand-off of 0.25 inches

(6.35 mm) in the end use product.

12 12 V is a floating output and can be referenced negative or positive.

13 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details.

14 NOTICE: Some models do not support all options. Please contact your

local Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

NLP70 Series

T riple output

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES

70 W AC/DC Universal Input Switch Mode Power Supplies

File Name: nlp70.pdf Rev (02): 08 Nov 2005

OUTPUT

OUTPUT CURRENT

RIPPLE (4)

TOTAL

MODEL

VOLTAGE

TYP. (1)

AIR (2)

PEAK (3)

REGULATION (6)

NUMBER (13,14)

+5 V (I

10.5 A

13 A

14 A

50 mV

±2.0%

NLP70-9693J

+3.3 V (I

10.5 A

13 A

14 A

50 mV

±2.0%

+12 V (12)

0.65 A

0.8 A

120 mV

±5.0%

Output Power (Watts)

26W

52.5W

70W

20CFM FORCED AIR COOLING

35W

NATURAL

CONVECTION

COOLING

DERATING CURVE

0˚C

10˚C 20˚C 30˚C 40˚C 50˚C 60˚C

70˚C

INPUT

PIN CONNECTIONS

Pin 1

AC Line

Pin 2

No Pin

Pin 3

AC Neutral

Pin 1

Safety Ground

OUTPUT PIN CONNECTIONS

FUNCTION

Pin 1

3.3V

Pin 2

3.3V

Pin 3

Return

Pin 4

Return

Pin 5

Return

Pin 6

Pin 7

FUNCTION

Pin 1

12V Return

Pin 2

12V (12)

NLP70 Datenblatt(PDF) 2 Page - Emerson Network Power

NLP70 Datenblatt(HTML) 2 Page - Emerson Network Power

Html Pages

1 2 3

Datenblatt Download

Link URL