10

All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

FN6827.0

December 15, 2008

micro-controller on each side of the of the link data can be

buffered and exchanged between the two. Up to 224 bytes

can be sent in each direction during each VSYNC active

period.

Master Mode

This is a mode activated by strapping the MASTER pin to a

‘1’ on the 34341 on the remote side of the controller. This is

allows the local processor to read and write slave devices

commands and data are transferred during video blanking

causing no interruptions in the video data. Data is

transported by the Side Channel across the link so the

maximum throughput would be the same.

ISL34341