November 2006

ASMP5P23S04A

rev 1.4

Notice: The information in this document is subject to change without notice.

PulseCore Semiconductor Corporation

1715 S. Bascom Ave Suite 200, Campbell, CA 95008

• Tel: 408-879-9077 • Fax: 408-879-9018

www.pulsecoresemi.com

3.3V ‘SpreadTrak’ Zero Delay Buffer

Features

•

Zero input - output propagation delay, adjustable

by capacitive load on FBK input.

•

Multiple configurations - Refer “ASM5P23S04A

Configurations Table”.

•

Input frequency range: 15 MHz to 133 MHz

•

Multiple low-skew outputs.

•

Output-output skew less than 200 pS.

•

Device-device skew less than 500 pS.

•

Two banks of two outputs each.

•

Less than 200 pS cycle-to-cycle jitter

•

(-1, -1H, -2, -2H).

•

Available in space saving, 8-pin 150-mil SOIC

package.

•

3.3V operation.

•

Advanced 0.35µ CMOS technology.

•

Industrial temperature available.

•

‘SpreadTrak’.

Functional Description

ASM5P23S04A is a versatile, 3.3V zero-delay buffer

designed

to

distribute

high-speed

clocks

in

PC,

workstation, datacom, telecom and other high-performance

applications. It is available in a 8-pin package. The part has

an on-chip PLL, which locks to an input clock, presented on

the REF pin. The PLL feedback is required to be driven to

FBK pin, and can be obtained from one of the outputs. The

input-to-output propagation delay is guaranteed to be less

than 250 pS, and the output-to-output skew is guaranteed

to be less than 200 pS.

The ASM5P23S04A has two banks of two outputs each.

Multiple ASM5P23S04A devices can accept the same input

clock and distribute it. In this case the skew between the

outputs of the two devices is guaranteed to be less than

500 pS.

The

ASM5P23S04A

is

available

in

two

different

configurations

(Refer

“ASM5P23S04A

Configurations

Table). The ASM5P23S04A-1 is the base part, where the

output frequencies equal the reference if there is no

counter in the feedback path. The ASM5P23S04A-1H is

the high-drive version of the -1 and the rise and fall times

on this device are much faster.

The ASM5P23S04A-2 allows the user to obtain Ref and

1/2X frequencies on each output bank. The exact

configuration and output frequencies depend on which

output drives the feedback pin.

The ASM5P23S04A-2H is a high-drive version with REF/2

on both banks.

Block Diagram

FBK

CLKA1

CLKA2

CLKB1

CLKB2

Extra Divider (-2)

/2

PLL

REF