ASM1832 datasheet(2/9 Pages) PULSECORE

Teilenummer	ASM1832

Bauteilbeschribung	3.3V 關P Power Supply Monitor and Reset Circuit

PDF	9 Pages

Scroll/Zoom	100%

Hersteller	PULSECORE [PulseCore Semiconductor]

Direct Link	http://www.onsemi.com/

Logo

2 / 9 page

2 of 9

Notice: The information in this document is subject to change without notice

3.3V µP Power Supply Monitor and Reset Circuit

rev 1.6

October 2006

ASM1832

Pin Configuration

Pin Description

Pin #

8-Pin Package

Pin Name

Function

PBRST

Debounced manual pushbutton reset input.

2TD

Watchdog time delay selection. (tTD = 150ms for TD = GND, tTD = 610ms for

TD=Open, and tTD = 1200ms for TD = VCC).

3TOL

Selects 10% (TOL connected to GND) or 20% (TOL connected to VCC) trip point

tolerance.

GND

Ground.

RESET

Active HIGH reset output. RESET is active:

1. If VCC falls below the reset voltage trip point.

2. If PBRST is LOW.

3. If ST is not strobed LOW before the timeout period set by TD expires.

4. During power-up.

RESET

Active LOW reset output. (See RESET).

7ST

Strobe input.

VCC

3.3V power.

PBRST

TOL

GND

VCC

RESET

ASM1832

ASM1832 Datenblatt(PDF) 2 Page - PulseCore Semiconductor