SC16426

Pad No.

Symbol

X

Y

Pad No.

Symbol

X

Y

22

SEG17

184.95

-640.40

62

SEG49

-178.65

640.40

23

SEG18

300.75

-640.40

63

SEG50

-294.45

640.40

24

SEG19

416.55

-640.40

64

SEG51

-410.25

640.40

25

GND

527.55

-640.40

65

GND

-521.25

640.40

26

SEG20

638.55

-640.40

66

SEG52

-632.25

640.40

27

SEG21

754.35

-640.40

67

SEG53

-748.05

640.40

28

SEG22

870.15

-640.40

68

SEG54

-863.85

640.40

29

SEG23

985.95

-640.40

69

SEG55

-979.65

640.40

30

SEG24

1116.45

-640.40

70

SEG56

-1110.15

640.40

31

SEG25

1232.25

-640.40

71

SEG57

-1225.95

640.40

32

SEG26

1348.05

-640.40

72

SEG58

-1341.75

640.40

33

SEG27

1463.85

-640.40

73

SEG59

-1457.55

640.40

34

GND

1574.85

-640.40

74

GND

-1568.55

640.40

35

SEG28

1685.85

-640.40

75

SEG60

-1679.55

640.40

36

SEG29

1801.65

-640.40

76

SEG61

-1795.35

640.40

37

SEG30

1917.45

-640.40

77

SEG62

-1911.15

640.40

38

SEG31

2033.25

-640.40

78

SEG63

-2026.95

640.40

39

GND

2043.00

-218.40

79

CLR

-2044.20

218.40

40

DATA

2036.05

-107.40

80

CLK

-2043.10

44.95

Note: the original point of the coordinate is the die center.

MOS DEVICES OPERATE NOTES:

Electrostatic charges may exist in many things. Please take following preventive measures to prevent effectively

the MOS electric circuit as a result of the damage which is caused by discharge:

The operator must put on wrist strap which should be earthed to against electrostatic.

Equipment cases should be earthed.

All tools used during assembly, including soldering tools and solder baths, must be earthed.

MOS devices should be packed in antistatic/conductive containers for transportation.

Note：Silan reserves the right to make changes without notice in this specification for the improvement of the design and performance.

Silan will supply the best possible product for customers.

HANGZHOU SILAN MICROELECTRONICS CO.,LTD

REV:1.1

2008.07.18

Http: //www.silan.com.cn

Page 6 of 7