MPC5643L datasheet(18/98 Pages) FREESCALE

18 / 98 page

MPC5643L Microcontroller Data Sheet, Rev. 3

Preliminary—Subject to Change Without Notice

Overview

Freescale Semiconductor

•

Independently programmable PWM output polarity

•

Independent top and bottom deadtime insertion

•

Each complementary pair can operate with its own PWM frequency and deadtime values

•

Individual software control for each PWM output

•

All outputs can be forced to a value simultaneously

•

PWMX pin can optionally output a third signal from each channel

•

Channels not used for PWM generation can be used for buffered output compare functions

•

Channels not used for PWM generation can be used for input capture functions

•

Enhanced dual edge capture functionality

•

Option to supply the source for each complementary PWM signal pair from any of the following:

— External digital pin

— Internal timer channel

— External ADC input, taking into account values set in ADC high and low limit registers

•

DMA support

1.3.31

eTimer module

The Leopard provides three eTimer modules on the 257 MAPBGA device, and two eTimer modules on the 144 LQFP package.

Six 16-bit general purpose up/down timer/counters per module are implemented with the following features:

•

Maximum clock frequency 120 MHz

•

Individual channel capability

— Input capture trigger

— Output compare

— Double buffer (to capture rising edge and falling edge)

— Separate prescaler for each counter

— Selectable clock source

— 0–100% pulse measurement

— Rotation direction flag (Quad decoder mode)

•

Maximum count rate

— Equals peripheral clock divided by 2 for external event counting

— Equals peripheral clock for internal clock counting

•

Cascadeable counters

•

Programmable count modulo

•

Quadrature decode capabilities

•

Counters can share available input pins

•

Count once or repeatedly

•

Preloadable counters

•

Pins available as GPIO when timer functionality not in use

•

DMA support

1.3.32

Sine Wave Generator (SWG)

A customized digital-to-analog converter is available to generate a sine wave based on 32 stored values for external devices (ex:

resolver).

•

Frequency range from 1 kHz to 50 kHz

•

Sine wave amplitude from 0.47 V to 2.26 V

MPC5643L Datenblatt(PDF) 18 Page - Freescale Semiconductor, Inc

MPC5643L Datenblatt(HTML) 18 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

Datenblatt Download

Link URL