ADP123AUJZ-R7 datasheet(16/20 Pages) AD

Teilenummer	ADP123AUJZ-R7

Bauteilbeschribung	5.5 V Input, 300 mA, Low Quiescent Current, CMOS Linear Regulator

PDF	20 Pages

Scroll/Zoom	100%

Hersteller	AD [Analog Devices]

Direct Link	http://www.analog.com

Logo

16 / 20 page

ADP122/ADP123

Rev. 0 | Page 16 of 20

140

120

100

VIN – VOUT (V)

ILOAD = 1mA

ILOAD = 10mA

ILOAD = 50mA

ILOAD = 100mA

ILOAD = 150mA

ILOAD = 250mA

ILOAD = 300mA

TJ MAX

0.4

0.8

1.2

1.6

2.0

2.4

2.8

Figure 40. Junction Temperature vs. Power Dissipation,

Board Temperature = 85°C

PRINTED CIRCUIT BOARD LAYOUT

CONSIDERATIONS

Heat dissipation from the package can be improved by increasing

the amount of copper attached to the pins of the ADP122/ADP123.

However, as shown in Table 6, a point of diminishing returns

eventually is reached, beyond which an increase in the copper

size does not yield significant heat dissipation benefits.

The input capacitor should be placed as close as possible to the

VIN and GND pins, and the output capacitor should be placed

as close as possible to the VOUT and GND pins. Use of 0402 or

0603 size capacitors and resistors achieves the smallest possible

footprint solution on boards where the area is limited.

ADP123AUJZ-R7 Datenblatt(PDF) 16 Page - Analog Devices